Q:WHAT BRAND OF BRAD NAILS WILL FIT THE HDX NAILER ?
by|Feb 7, 2015
3 Answers
Answer This Question
A: Any brand. As in any brands which are of the same variety and arrangement (Porter Cable, etc.) Even some cheap import non-brands.
by|Mar 6, 2015
1 found this answer helpful
A: I bought and used some Bostich 18 Guage with no problem...
by|May 3, 2023
A: It will accept the type of brad heads you desire.
by|Sep 25, 2019
1 found this answer helpful
Q:In the picture it shows 3 units. Do you get all three?
by|Feb 1, 2015
5 Answers
Answer This Question
A: Yes, You get all THREE pictured. A small bag (too small for practicality), and a few strips of fasteners.
by|Mar 6, 2015
A: Yes, you do. Along with some staples and nails, a carrying case (that is very tight but adequate), and a small bottle of lube oil.
by|May 3, 2023
A: Yes, you get all three pieces and with sample loads and Air Tool oil, nicely packaged in a sturdy bag.
All 3 have 1/4 inlet pre-attached. Simply put, these tools are ready for actions right out of the bag.
by|May 3, 2023
3 found this answer helpful
A: Yes. You get the 3 nailer/staplers, nails & staples for each gun and a canvas bag for all of it.
by|May 3, 2023
2 found this answer helpful
A: Yes
by|May 3, 2023
Q:Do I need an air compressor for this product?
by|Feb 1, 2015
5 Answers
Answer This Question
A: Yes. It's a pneumatic tool, meaning you must have pressurized air to operate.
by|May 3, 2023
A: Yes, you will need an air compressor and a hose. You can use a smaller 3 gallon one if you like. These nailers are pretty small, so they will let you fire about 20 at a time before it has to air up. I prefer smaller compressors, and light coiled, plastic hoses for light tools such as these. Make sure your hose has a quick connect coupler for ease of changing out the tools from one to another.
by|Mar 6, 2015
A: Yes. A small pancake compressor would be enough.
by|May 3, 2023
1 found this answer helpful
A: All pneumatic tools get their power through compressor, so yes, a compressor is a must for these.
All in all, you will need a compressor, a hose and quick connect couplers.
I've been using it with Husky 33 Gal. and what a great team they make together.
by|May 3, 2023
4 found this answer helpful
A: Yes. Pneumatic means it uses air for power. Also look at the rear of the tool. It has the end to accept the air hose.