Questions and Answers for Hunter Sea Wind 48 in. Indoor/Outdoor Matte Black Ceiling Fan For Patios or Bedrooms

A:  Top edge is 6 1/2 inches from the ceiling. Bottom is 8 inches from the ceiling. Hope that helps.

A:  Ceiling to lowest point on the blades is 8 inches.

A:  From the top edge of the motor housing--which is the part that touches the ceiling--to the topside of the fan blade where it attaches to the 'paddle,' it is 6 3/4"

A:  Hello, For the Sea Wind model, the height from the ceiling to the bottom of the fan blade is 8.02 inches. Please let us know if you have any additional questions. Have a great day! Hunter Fan Company

A:  From ceiling to bottom edge of fan blade is 8”.

A:  I just submitted the answer to the distance from ceiling to fan blade as 6 3/4" I should clarify--that is the measurement for the high edge of the fan blade that is closest to the ceiling. The other edge of the fan blade of course has a little more clearance.

A:  Yes

A:  Yes it can

A:  Hello Sandy, Yes, the Sea Wind model will be compatible with an accessory light kit. If the fan is being installed outdoors, we recommend an outdoor-rated light kit like the (28511) model. Thank you!

A:  Yes

A:  No. Ac

A:  Hello Tosta, No the WhisperWind motor is not a DC motor. Thank you!

A:  Hello Kelly, The canopy width for the Sea Wind model is 12.50 inches. Thank you for contacting us!

A:  No, you would need to buy a fan that has a rod. This fan has no rod.

A:  Hi Ivan, No, the Sea Wind model is a Low Profile fan that cannot be installed on an angled ceiling. Thank you for contacting Hunter Fan Company!

A:  Not recommended

A:  Hello, Yes, the Sea Wind model fan will be compatible with Hunter accessory controls that can be found at the link below. Have a great day! http://thd.co/2jkVeLF

A:  You can use a hunter universal remote with this fan.

A:  Yes any AC switch

A:  Yes

A:  yes

A:  Hello MarkD, The Sea Wind fan will be compatible with Hunter accessory wall controls and an on/off wall switch. However, you will not be able to change the fan speeds if you are using a general on/off switch. You will find the link below to the accessory wall controls. http://thd.co/2i10zI1

A:  No

A:  No

A:  ?

A:  Hi Donna, sorry this fan is designed only to be flushed mounted.

A:  Husband knows electricity. Be sure to turn of circuit breaker to cut power if you intend to install yourself.

A:  A light kit would be compatible with this particular fan. Please contact us at Social@help.HunterFan.com and we'll take a look into which light kits would be compatible.