Q:I'm looking to purchase the rectangle vessel sink that sits on top does it come with the faucet or is that a separate charge?
by|Apr 17, 2024
1 Answer
Answer This Question
A: The faucet does not come with the ceramic sink. The faucet is sold separately.
Luxier
by|Apr 17, 2024
Q:Could you recommend a vanity counter to hold it
by|Mar 27, 2024
1 Answer
Answer This Question
A: We recommend a minimum of 30 inches wide vanity for 1 ceramic sink. For double sinks installation the vanity should be about 60 inches wide.
by|Mar 27, 2024
Q:Can you supply me with a fully dimensioned drawing of the sink especially the location of the drain hole relative to the edges. The link you supplied to an earlier in September 2023 doesn’t work. Thanks
by|Nov 12, 2023
1 Answer
Answer This Question
A: Here is a link to the updated drawing, http://www.luxierusa.com/Documents/ProductDownloads/CS-021%20Template_218.pdf. If you are unable to open the link, please contact our customer support at support@luxierusa.com and we will email you the drawing.
by|Nov 13, 2023
Q:I want to know if I remove my existing undercounted sink will this sink be able to cover the hole and mount directly on the counter top
by|Nov 10, 2023
1 Answer
Answer This Question
A: In most cases, the sink should be able to cover the original opening on the countertop. However, we'd recommend you consult with a contractor or builder to make sure the sink will work in this particular installation.
by|Nov 10, 2023
Q:what does the back of the sink look like? i'm searching for a vessel without holes
by|Sep 30, 2023
1 Answer
Answer This Question
A: The back of the sink is smooth without any holes and glazed as the front of the sink.
by|Feb 8, 2024
1 found this answer helpful
Q:What is the cut out size?
by|Sep 14, 2023
1 Answer
Answer This Question
A: The cutout size for the drain is about 3 inches in diameter and the cutout size for the faucet is 1-3/4" in diameter. You can find detail specs at the following link, http://www.luxierusa.com/Documents/ProductDownloads/CS-021%20Template_218.pdf
by|Sep 15, 2023
Q:can we replacethis one for the old one have 3 holes?
by|Jul 31, 2023
1 Answer
Answer This Question
A: Hi,
We are not so sure what you mean by 3 holes. Did you mean the 3 holes from the old faucet? The faucet is not installed directly on the countertop. It may work as long as the holes are large enough for the supply hoes to pass through. You will also need an opening for the drain. Please contact our customer service at support@luxierusa.com to obtain a cutout template, this should help you in your installation.
Luxier
by|Aug 1, 2023
1 found this answer helpful
Q:Is this sink flat on the bottom? I would need to install it on top of my counter with a hole for the faucet/drain only.
by|Jul 28, 2023
3 Answers
Answer This Question
A: Yes
by|Jul 29, 2023
A: The bottom of the sink is flat, it is designed for countertop installation.
by|Aug 1, 2023
A: Yes, it is flat on the bottom and is intended to be installed on a flat surface.