Questions and Answers for OSI QUAD Advanced Formula 10 fl. oz. Green #707 Exterior Window Door and Siding Sealant (12-Pack)

A:  Thank you for the question. OSI QUAD Sealant is an exterior solvent based product that is inert when cured. It is not possible for this product to support mold growth itself; however, that does not mean mold growth cannot occur on the surface of the sealant should it become contaminated with airborne organic particulate. Mold growth requires the following conditions: temperature range above 40°F and below 100°F, mold spores which are commonly found in the environment, a nutrient base (a food source which is organic such as atmospheric dust particles, vegetation or tree pollens, etc.), and moisture.

A:  Thank you for the question. OSI QUAD Sealant is a solvent-based product which remains flexible once cured to allow for movement with typical expansion and contraction of building materials; however, OSI QUAD MAX is more flexible once cured, although either may be used on cedar surfaces.

A:  Thank you for the question. OSI QUAD Sealant can be applied between 20°F (-7°C) and 100°F (38°C). For easier extrusion of sealant at lower temperatures, store cartridge at room temperature at least 24 hours prior to use.

A:  Thank you for your question. OSI QUAD Sealant can be painted once fully cured, typically in 7-14 days, depending on temperature, humidity, and depth of the sealant applied. Latex paint is recommended.

A:  Thank you for your question. OSI Quad Sealant is a solvent-based product and is not recommended for interior use in occupied living areas, for safety reasons. You may visit www.ositough.com for more information on OSI QUAD Sealant.

A:  Thank you for your question. OSI Quad Sealant is a solvent-based product and is not recommended for interior use in occupied living areas, for safety reasons. You may visit www.ositough.com for more information on OSI QUAD Sealant.

A:  Thank you for the question. OSI QUAD Sealant is paintable with latex paint or primer once it is fully cured. The curing time is 7-14 days and is dependent on temperature, humidity, and the depth of the sealant applied.

A:  Thank you for the question. Uncured sealant residue may be cleaned up immediately with mineral spirits or paint thinner, following the solvent manufacturer's precautions. Cured sealant must be carefully cut away with a sharp-edged tool.

A:  Thank you for your question. OSI QUAD should not be painted until fully cured. Full cure may take 7-14 days, or longer, depending on ambient conditions and volume of sealant used. Latex paint is recommended, but if using oil based/alkyd paint, a latex primer should be used first. It is the responsibility of the user to conduct on-site testing to determine compatibility and suitable results. Keep in mind, paints are more rigid than sealants and may crack, wrinkle or lose adhesion during sealant movement.

A:  Thank you for the question. OSI QUAD is water resistant but not waterproof. This product is not recommended for use in prolonged underwater applications or permanent water immersion.