Questions and Answers for Paragon Outdoor Madrid 10 ft. x 12 ft. Aluminum Hard Top Gazebo with Mosquito Netting

A:  Hello! This is an very nice Gazebo. The max entry height is 6 feet 9 inches!

A:  The lowest point on the roof is 86" (7.2 ft) above ground. The highest point inside the gazebo is 108" (9.0 ft). I did not measure the height of the roof peak but it must be very close to 9.2 ft. Clearance under the horizontal roof support beam is 82" (6.8 ft).

A:  This Gazebo is not 9x9. Please see this: Paragon-Outdoor 13.2 ft. W x 9.11 ft. D x 9.2 ft. H Louvered Roof Madrid Gazebo

A:  Yes. We sell replacement roof panels and any replacement part for that matter

A:  The roof is twin layer, 6mm polycarbonate with a louver in between them. The Louvre itself is plastic.

A:  The roof is steel.

A:  The height of the gazebo is 9.2 ft. There is 6.8 ft of clearance under the roof support beam.

A:  9'2" is from the ground to the top of the wind escapement.

A:  Yes, the louvers are sandwiched between two layers of impermeable polycarbonate sheeting. Rain can still come in the open sides but not thru the roof.

A:  YES. The louvre is between two pieces of 6mm polycarbonate. This roof keeps out the rain.

A:  Yes, this keeps out the rain.

A:  The ground to the edge of the roof is 7 feet.

A:  Most local Home Depot stores have name of installer that can help you!

A:  The manufacturer states that it can handle high winds and a snow load of 50 lbs per square foot. Base don the design I would agree with this. I purchased it to stay up all winter and do not have any concerns. The unit is vented on the top to reduce air pressure build up under the canopy in the event of a high wind storm.

A:  Yes. This structure is designed to be a 12 month structure. It can stay up.

A:  The warranty does not cover weather damage. If you are in danger of having heavy storms you could take this gazebo down.

A:  No, the gazebo does not come with netting or shade panels.

A:  You can purchase this at Home Depot on line with mosquito netting.

A:  The roof panels are a two layer tinted polycarbonate plastic. There are louvers between the plastic layers for additional shading.