Q:Does this compressor let you regulate the downstream pressure (tool pressure) like the PC1010N does?
by|Jul 12, 2017
3 Answers
Answer This Question
A: Yes, separate control for that.
by|Jan 1, 2023
1 found this answer helpful
A: Yes. It has a regulator for both the air tank and for the outflow.
by|Jan 1, 2023
1 found this answer helpful
A: Yes. The PC1010 has a regulator that allows you to adjust the pressure going to your tool just like the PC1010N does.
by|Jan 1, 2023
1 found this answer helpful
Q:How many amps at start?
by|Mar 23, 2017
1 Answer
Answer This Question
A: The PC1010 draws a max of 4 AMPs at 115V.
by|Jan 1, 2023
1 found this answer helpful
Q:Can it be used to spray paint small jobs like a garage door?
by|Feb 19, 2017
2 Answers
Answer This Question
A: I have not used it with a spray gun. However I don't think it can sustain the air volume but maybe with a low pressure paint gun it might work.
by|Jan 1, 2023
1 found this answer helpful
A: Not really. I don't know what kind of paint gun you have but the CFM output is pretty low, around 1.5 CFM
by|Jan 1, 2023
2 found this answer helpful
Q:Does this compressor require a "break in" period before actual use?
by|May 30, 2016
3 Answers
Answer This Question
A: Not according to the manual. Mine didn't require one. (I use it to fill the air in my car and my parents' cars.)
by|Jan 1, 2023
1 found this answer helpful
A: I used mine straight out of the box and it worked fine without any problems
by|Jan 1, 2023
1 found this answer helpful
A: I know this is answering your question a year later, but the answer is NO.
Runs great out of the box!
by|Jan 1, 2023
1 found this answer helpful
Q:Can it be used with 16 gauge nailer?
by|Feb 9, 2016
7 Answers
Answer This Question
A: I think ultimately you will be disappointed for that use..........
by|May 16, 2020
1 found this answer helpful
A: Yes it can be used with a 16 gauge finish mailer. I use it all the time.
by|Jan 1, 2023
2 found this answer helpful
A: If this will or not work with a particular tool would be a question for the manufacturer of the tool. This item should be capable of providing 125 psi of compressed air with a 1/4" line. Check with the manufacturer of the nailer for operating requirements.
by|Jan 1, 2023
2 found this answer helpful
A: Yes
by|Jan 1, 2023
1 found this answer helpful
A: Absolutely
by|Jan 1, 2023
2 found this answer helpful
A: Yes it can. I use it with my 16 gauge finish nailer all the time, no issues.
by|Jan 1, 2023
2 found this answer helpful
A: I've used this with both my Porter Cable 15 ga finish nailer as well as a few different 18 ga brad nailers.
It's a strong little compressor and I love it being that the weight is half that of the standard pancake compressors
that are on the market. It may cycle more frequently of course, but I have nothing bad to say about it. Senco is a great
name in the air tool market also.
by|Jan 1, 2023
2 found this answer helpful
Q:what is the decibel rating of this comp.
by|Jan 30, 2016
5 Answers
Answer This Question
A: The decibel rating of this unit is 68 dBA.
by|Jan 21, 2023
7 found this answer helpful
A: I believe it's around 69-70 decibels. It is VERY quiet compared to my old Craftsman Compressor 921.1521. My father has tinnitus and he says it is much better than the Craftsman.
by|Jan 21, 2023
2 found this answer helpful
A: Don't know but I can talk on the phone with compressor going. I would be shocked if there is anything quieter!
by|Jan 21, 2023
2 found this answer helpful
A: not sure on decmil rating but it is the quietest compressor I have ever found.
by|Jan 21, 2023
2 found this answer helpful
A: I measured 74db sound level at about 1 meter while sitting on a concrete shop floor about 12" from a sheetrock wall. I'm using two together at 76db with both running.
by|Jan 21, 2023
2 found this answer helpful
Q:need to see airlines
by|Nov 14, 2015
1 Answer
Answer This Question
A: Air lines are not included, you have to add your own, available at Home Depot and such, also available at most auto parts stores.
Not expensive at all, less than $20 for hose kit with accessories. JD in Colorado
by|Jan 21, 2023
2 found this answer helpful
Q:Would this compressor work well for airbrush work?
by|Nov 11, 2015
4 Answers
Answer This Question
A: yes
by|Jan 1, 2023
2 found this answer helpful
A: This was a gift to my son and that is what he uses it for. He loves it.
by|Jan 1, 2023
3 found this answer helpful
A: I don't airbrush but this compressor puts out about 1.4cfm at 20psi
by|Jan 1, 2023
1 found this answer helpful
A: yes
by|Jan 1, 2023
2 found this answer helpful
Q:Is the hose and all accessories quick dissconnect
by|Oct 10, 2015
4 Answers
Answer This Question
A: Yes!
by|Jan 1, 2023
1 found this answer helpful
A: Does not come with a hose or inflator gun, you have to buy them separately. However, the connection from the tank is a quick-connect one, although you can remove it, if you want to hook up a normal connection.
by|Jan 1, 2023
1 found this answer helpful
A: Yes, this model does feature quick disconnect.
by|Jan 1, 2023
1 found this answer helpful
A: Yes they are furnished with a standard quick disconnect.
by|Jan 1, 2023
1 found this answer helpful
Q:I can't seem to find what size hose to buy for this compressor. Should I use 3/8" or 1/4" hose?
by|Aug 21, 2015
5 Answers
Answer This Question
A: I have used both but I am partial to the 1/4" tangle free air line.
by|Jan 1, 2023
1 found this answer helpful
A: I use 1/2 hose - bradnailer
by|Jan 1, 2023
2 found this answer helpful
A: This 1 Gal. 1/2 HP Portable Electric Air Compressor uses a 1/4" hose.
by|Jan 1, 2023
3 found this answer helpful
A: I'M using 1/4" hose on my 16 and 18 Ga nailers, I have not done any large projects that needed a lot of tool use