Questions and Answers for Varathane 8 oz. Gray Classic Wood Interior Stain Classic

A:  Happy to help, Suzy. Varathane Classic Wood Stain can be applied to an outdoor wooden gate, however the wooden gate must be bare wood and after applying the stain, Varathane Ultimate Spar Urethane must be applied. Varathane Stain absorbs into the wood, Spar Urethane is a clear coating that products the wood from moisture and harmful UV rays. Refer to the Spar Urethane label to see how many coats are required. https://www.homedepot.com/s/varathane%20spar%20urethane?NCNI-5 - Rust-Oleum Product Support 6

A:  We appreciate your interest, Carolyn! Since Rust-Oleum Varathane Classic Wood Stain is semi-transparent, the final appearance will be dependent on the wood species used and its condition. If trying to match a different material type, you will want to test in a small area first to ensure a favorable color. This stain is available in 27 different colors. Check out all the available colors in the listing on the Home Depot website. - Rust-Oleum Product Support 13

A:  Happy to help, James. If a darker shade of Varathane Espresso Classic Wood Stain is desired, an additional coat can be applied. Apply the stain across the grain until the wood is saturated on top, allow the stain to remain on the surface a few minutes. Wipe the excess stain off in the direction of the wood grain. Do not let the stain dry before wiping off the excess. If a third coat is desired, wait 2 hours, do not sand stain between coats. - Rust-Oleum Product Support 6

A:  Thanks for reaching out, Sharon. As included on the labeled instructions, Varathane Classic Wood Stain is applied across the grain until the wood is saturated on top, using a brush or clean, lint free cloth. After applying the stain, all excess stain must be wiped off in the direction of the wood grain, do not allow the stain to dry before wiping off all excess stain. After wiping off all excess stain, the surface should be dry to the touch in 1–2 hours. Give us a call at 800-901-0411, so we can hear more about your application and try to make things right. - Rust-Oleum Product Support 6

A:  Happy to help, Andrew! Rust-Oleum Varathane Classic Wood Stain can be applied to bare wood vanities. It can be topcoated with a polyurethane once dry. Make sure all excess stain is wiped away to ensure proper drying. - Rust-Oleum Product Support 3

A:  Thanks for reaching out. Varathane Classic Wood Stain is available in 27 different colors. Check out all the available colors in the listing on the Home Depot website. - Rust-Oleum Product Support 6

A:  Happy to help, Janet! To ensure proper drying and appearance, all excess stain needs to be wiped away after a few moments. If excess stain is on the surface, it can remain tacky and clean rags and mineral spirits should be used to help remove it. Softer woods may require a wood conditioner to prevent a blotchy or uneven appearance. Rust-Oleum Varathane Classic Wood Stain must also be applied only when relative humidity is below 85%. - Rust-Oleum Product Support 3

A:  Thanks for reaching out, Steve. Varathane Wood Stain can be applied to surfaces that do not exceed 200°F. - Rust-Oleum Product Support 6

A:  Just fine.

A:  Thank you for reaching out, CeeCee! Rust-Oleum Varathane Classic Wood Stain in Red Oak does have a deep red undertone to it. The final appearance of the stain will be dependent on the condition of the wood and what species it is. Prior to application, we do recommend applying the stain in a test area first to ensure a favorable appearance. - Rust-Oleum Product Support 3

A:  Happy to help! Rust-Oleum Varathane Classic Wood Stain is an oil-based stain, so it should be used in a space with good ventilation and air circulation. You also want to ensure that the product is applied as directed and all excess stain is removed. This will ensure proper drying and prevent lingering odors. - Rust-Oleum Product Support 3