Questions and Answers for Veranda 3/4 in. x 5-1/2 in. x 8 ft. White PVC Trim

A:  It is a solid piece of material, used for exterior trim mostly

A:  Ask your Home Depot specialist or called manufacture have a great evening God bless stay safe thank you

A:  It depends on what you are going to nail it to. If you had an older home (1940 on back) and you were going to nail this type of Trim or even wood trim that you buy, to it, Aluminum Nails would not work, nor the steel nails you by today, unless you drilled a Pilot hole first. But if you are working with today's, Wood, Framing or Trim, Aluminum, should work well.

A:  Latex Paint, either Exterior or Interior depending on were you use the boards, I suggest applying (2) coats of Paint. The painting area of your nearest Home Depot can also help in the brand and line of paint

A:  You do not have to paint it, but if you want any type of gloss finish, Satin, Eggshell gloss or High Gloss, you will need to paint it. You need to use an Exterior Paint on the outside or Interior paint on the inside of your home. Your Home Depot Sales person will be glad to help you with a Grade of Paint,

A:  This product does not require painting.

A:  Great question Koa. Actual dimension is 3/4" x 5-1/2". Nominal size is a 1" x 6". Thank you for the inquiry. Inteplast Building Products

A:  When you purchase lumber at any supply house that sell framing or trim lumber or the PVC material a 1" x 6" is actually 3/4 of an inch thick and between 5-1/2 to 5-3/4 in size, depending on the lumber mill or PVC material

A:  Great question! Although our PVC Trim is manufactured to be used outside, it is a non-weight bearing product. There would need to be some type of support for our product to be used in this manner. We recommend using a product made specifically for fencing. Thank you. Inteplast Building Products

A:  I would use Pressure Treated Wood on a fence

A:  No, it can't be use to make a frame

A:  You can Purchase PVC Door frames, both exterior and Interior, Check with your Home Depot Sales person in the Building Department. But you could build your on frame, by using either a double 2" x 4" or 2" x 6" studs to nail it to, Plus you would need to add a stop mold along with it. Plus what ever type of trim on each side.

A:  Thank you for your question Benjamin. Our PVC Trim is a non-structural, non-weight bearing product. It cannot be used AS the frame for your door. It can be used as trim ON your door. If you have any further questions please contact us. Inteplast Building Products

A:  What he meant to say is yes you can, as long as there is a subfacia that the board is mounted to anyway (like most times). Just make sure the gutters are anchored through this product into the subfacia and it will be fine.

A:  Great question. Our Trim board is nonstructural. No, you cannot install gutters on this trim. Thank you. Inteplast Building Products Customer Service

A:  Yes, you can use it as a fascia board, we do it all the time, when replacing rotten fascia boards for our customers, this is a Great Product to use for this and it does not rot. You can also install gutters to it also.

A:  Yes. you should be able to as long as the PVC board is attached well.

A:  Yes

A:  Yes, it very dense material

A:  yes and no jt. these pvc boards are great for facia and trim. will never rott. but they are a like a soft wood meaning if you use just gutter nails, they will become loose quicker than normal. but if you use gutter screws and use long enough to go through the gutter, pvc board and into the 2 by 4 stud. it works great.