A: This isn’t wood. It’s more like plastic so if you have a paint that adheres to plastics, I don’t see why it couldn’t be painted.
by|Jan 16, 2023
Q:How thick is the lattic panels
by|Dec 31, 2022
1 Answer
Answer This Question
A: Appox 0.19 in.
by|Apr 13, 2023
Q:how do you connect a corner ( what do you use)
installing veranda vinyl lattice how do you connect corners coming together?
by|Sep 10, 2021
2 Answers
Answer This Question
A: If you use some vertical 2x4 or other PT lumber size for the corner piece, you can attach it by screwing thru it, into the wood.
by|Oct 26, 2022
1 found this answer helpful
A: Hi Margaret, give us a call at 877-279-4496 and we can help answer installation questions.
by|Sep 15, 2021
Q:Does the nantucket gray color match the gray veranda composite decking sold in store?
by|Jun 26, 2021
1 Answer
Answer This Question
A: Best way to know for sure would be to go to the store. Even pics are going to vary.
by|Jun 27, 2021
Q:Thrpere is far more horizontal than vertical space under my deck. Would a horispzontal installation, supported by vertical posts every 4 ft or so, work?
by|Jun 10, 2021
5 Answers
Answer This Question
A: Yes, I used mine horizontally. It looks great. I put mine up underneath my front porch a few years ago and it still looks great! I am very pleased with this product.
by|Jun 12, 2021
A: Sure. It installs either way.
by|Apr 27, 2024
A: Hi! I don't think 4 feet apart would work. Instructions say you should screw every 2 feet. I know from my experience the wind can really catch these. I did every 2 feet and still had one break off. Overall they held up very well at 2 feet. I would buy again and recommend them. Good Luck!
by|Jun 10, 2021
A: Yes, I would work.. that's exactly how I installed mine, and it looked great..!!
by|Jun 15, 2021
A: mine came rolled up,and was a lot less rigid than the white panels that can be purchased in the store,
this product was is difficult to work with.
by|Apr 1, 2023
1 found this answer helpful
Q:What size drill bit for the recommended "oversized" holes? "Largest" is not very specific.
by|Jun 8, 2021
1 Answer
Answer This Question
A: My husband used small self tapping screws into metal. However, he estimates used 1/8" or less for wood. Did not drill into vinyl but into upper top of corner to brace. Hope this helps.
by|Jun 10, 2021
Q:Is this material paintable?
by|Apr 25, 2021
2 Answers
Answer This Question
A: I painted the piece I bought, but, even though I bought home depots best paint, it still chips off easily.
by|Jun 24, 2022
1 found this answer helpful
A: Instructions say this is NOT paintable. I did see one job where it was painted and over the winter some minor paint seemed to peel away. I think that after a few years you may see significant problems. Just my humble opinion. Good Luck!
by|Jun 10, 2021
Q:Will you restock the Brazilian Walnut or has it been discontinued? If discontinued, what is the next closest color to match a dark brown deck stain?
by|Apr 25, 2021
1 Answer
Answer This Question
A: Yes, I bought 5 lattice to decorate my porch but I need other lumbers to complete the decking. They are beautiful and should look fantastic afterwards.
by|Jun 25, 2021
Q:Is this lattice paintable?
by|Apr 22, 2021
2 Answers
Answer This Question
A: It’s plastic. I’m sure if you prepped it correctly it could be but I wouldn’t try painting it as is.
by|Apr 24, 2021
A: its vinyl, why paint it ? buy cheaper wood lattice, paint that. they do sell special paint for vinyl
by|Apr 23, 2021
Q:Can you paint it?
by|Apr 7, 2021
4 Answers
Answer This Question
A: Yes, my neighbor painted hers and touched it up later but as most painted plastics it doesn’t last unless you keep on top of it
by|Apr 10, 2021
A: I don't think you can paint it. It's not wood, but a type of plastic (vinyl) and I don't know how paint will adhere to it long term. The lattice comes in different colors, so perhaps you can find a color that matches what you would like.
by|Apr 12, 2021
A: Yes. Choose a latex urethane paint that can flex with it.
by|Apr 9, 2021
A: Yes, but... if you just slap some latex paint on it will likely peel off before long. You will need plastic paint, or an adhesion promoting primer, or something specifically made for painting plastic.