#1 Home Improvement Retailer

Questions and Answers for Wright Products Heavy Duty Pneumatic Screen and Storm Door Closer with EZ-HOLD, White

Internet #203654835

Model #V2012WH

Store SKU #181447

  • Fits out-swinging medium to heavy screen and storm doors
  • EZ-Hold Pneumatic Closer keeps the door open with a single button
  • Easily adjustable closing speed

Questions & Answers

55Questions
caret
Q:Wright products Model v2000. Where to buy and how much?
by|Jul 10, 2021
2 Answers
Answer This Question

A:  HOME DEPOT

by|Jul 13, 2021

A:  Thank you for the interest in our V2000 storm door closer. The V2000 has been discontinued and the V2010 is the replacement, If you have any questions please do not hesitate to contact our HamptonCare team at 1-800-562-5625. One of our associates would be happy to assist you.

by|Jul 13, 2021
    caret
    Q:The issue with this door closer with the door stop device on its side, is that if you do not have enough depth between storm door & front door cavity the side mounted door stop device does not allow the front door to close. The original device was top mounted & my wife purchased this model without technical advice and I mounted the new unit and did not realize of the room required until I went to close front door... Is there an adapter than can be added to this unit to allow the stop to rotate to top of unit ?
    by|Apr 4, 2021
    3 Answers
    Answer This Question

    A:  I've had no problem... "side mounted"? I don't understand. The push button on the ones I've had is on top of the device. There was/is only one way to attach this to the storm door..bottom , inside, facing the regular door. the button is then on the top of the device. I think you need to take a picture to Home Depot to help the man tell you what/ how... Like I said, there's been no problem with mine... (I did have to buy this one to replace the one that came with the storm door: too many times of "stomping" the button down before everyone learned to just open the door wider to release it and let the door close. haha

    by|Apr 6, 2021

      A:  We're sorry to hear your V2012WH heavy duty closer does not fit between your doors without the button engaging. Please contact our HamptonCare team at 1-800-562-5625. One of our associates would be happy to assist you with a standard duty tap-n-go, which will fit.

      by|Feb 24, 2022
        3 found this answer helpful

        A:  I had the same problem and just reversed the bracket that mounts to the threshold. Where the bracket points to the storm door, point it to the front door to give more clearance.

        by|Jul 19, 2021
          caret
          Q:Would this be strong enough to use on a small wooden gate?
          by|Mar 22, 2021
          3 Answers
          Answer This Question

          A:  I would be concerned about using the product in the outside weather

          by|Mar 22, 2021

          A:  Not for exterior use.

          by|Mar 23, 2021

            A:  yes it will work great

            by|Mar 23, 2021
            caret
            Q:Is this available in a color such as off-white, or almond, or something close?
            by|Feb 23, 2021
            2 Answers
            Answer This Question

            A:  Thank you for your interest in our Wright Products tap-n-go door closer, It is available in black and white only.

            by|Feb 24, 2021

              A:  no, black or white

              by|Mar 19, 2021
              caret
              Q:How can I get the door to only stay open when the button is pressed? Every time I open the door (without tapping the button), the door holds open.
              by|Dec 9, 2020
              2 Answers
              Answer This Question

              A:  Try unscrewing the adjustment screw one turn.

              by|Feb 18, 2023

                A:  Mine only stays open when the button is pressed, so I would check with the manufacturer. Seems you may have a defective closer.

                by|Jun 8, 2022
                caret
                Q:What is O.D. and length of tube?
                by|Dec 7, 2020
                1 Answer
                Answer This Question

                A:  Tube length 11-1/4"

                by|Dec 8, 2020
                  caret
                  Q:Does this product push the door closed?
                  by|Oct 12, 2020
                  5 Answers
                  Answer This Question

                  A:  No, it pulls the door close. You lock the door open with button on closure and then you push it slightly open and it reieases and closes the door.

                  by|Oct 13, 2020

                  A:  It pulls the door closed. It is mounted on the inside of the door. .

                  by|Oct 12, 2020

                  A:  No,it doesn't push it, it pulls the door closed

                  by|Nov 13, 2020

                  A:  For outswing doors, pulls the door closed.

                  by|Oct 12, 2020

                    A:  no

                    by|Apr 5, 2021
                      caret
                      Q:I installed a new tap n go but is not opening 90 degrees how can I fix it?
                      by|Jul 22, 2020
                      1 Answer
                      Answer This Question

                      A:  For a full 90 degree opening position the open side of the jamb bracket ¼” from door. If mounted further away from door it will not open to 90 degrees. If that is correct and you are still not getting an opening of 90 degrees, try flipping the jamb bracket so open side faces away from your storm door. If there is anything we can do for you, please do not hesitate to contact our Hampton Care Team at 1-800-562-5625. One of our associates would be happy to assist.

                      by|Jul 22, 2020
                        caret
                        Q:will this work with a vinyl screen door
                        by|Jul 2, 2020
                        3 Answers
                        Answer This Question

                        A:  I would think that it would .its a heavy door that I have .

                        by|Jul 8, 2020

                          A:  Not sure you can always contact the manufacturer of this product sorry .

                          by|Jul 9, 2020

                            A:  Heavy duty closer for storm doors only, too strong for screen doors.

                            by|Jul 7, 2020
                              caret
                              Q:Is this hydraulic or pneumatic?
                              by|Jun 23, 2020
                              1 Answer
                              Answer This Question

                              A:  Thank you for your interest in our Wright Products Tap-N-Go closer. It is pneumatic.

                              by|Apr 8, 2023

                                Frequently Bought Together

                                +
                                +
                                Price:
                                $26.93