Customer Reviews for BATHWORKS 20 oz. DIY Bathtub Refinishing Kit- Bone

Works amazing, however you have to watch zillion time the instruction on YouTube. Cleaning and prep are key. Let me say again. CLEAN AND PREP ARE THE key. Tenants left the house in a disgusting way, check what did... foto attached. I had no experience with this kind of work. But I did.

I followed the directions to a T and after three weeks it started chipping away and peeling. I contacted the company and they said i did everything right and sent out a repair kit. I dont think it will hold up. I emailed the company twice on how to remove it entirely and they never replied. I’m extremely disappointed with the results, and do not recommend this product.

Waste of a lot of money and a lot of time. I followed the instructions to a "T" when preparing my fiberglass shower pan for applying this and what I got was a runny mess. The instructions are very clear to never let the roller go dry and to put on a thick coat... against my better judgement working with other paints I followed this guidance and what I got was a shower pan with drips and runs everywhere... In fact it looked BETTER before I put this stuff on! Bathworks should be ashamed of themselves for putting out this product. 100 dollars wasted... I would like my money back.

The product its self was easy to mix and use.Everything you need to do a standard tub with 2 coats and a bit more to hit any light spots.I went 3 coats in the front to middle of the tub to make a bit thicker coat.I also decided to do the tile wall around the tub.It says it does 60 sq ft,,that is pretty close to right.Cleaning is the hardest part.I spent hours scraping and scrubbing the tub and the walls just to be sure there was nothing left untouched or uncleaned .But,my old tub had been refinished before so I had to scrap more,to scrap off all the old refinish that was weak of flaky because I don't think the first refinish job was cleaned good enough.I believe good cleaning is the key to good adhesion and lasting.I have an older house and had to replace a few wall tiles and couldn't match the color,so decided to do the tile walls after I did the tub.I am very pleased with the out come of the whole job,it has a nice sheen to the tiles,brightened up the bathroom,Biscuit is nor far off from white,I maybe should have gone Bone.The non-slip part of the kit ,good idea and works very good.(the white patch in the unfinished tub photo).Read directions well,,open all windows you can,use a fan to keep air moveing,I used a respirator and I suggest anyone useing this product to also.The fumes are tough.A regular dust mask in not enough.All in all ,it looks great,was easy to use.I only gave it a 4 star for now,will have to wait and see how long it last.The refinish on my tub had been on long time and it had lasted except where the tub wasn't cleaned well,so this product should last along time with new technology in the manufacture of this product and for the price,if it lasts 5 plus years,I'll be happy P.S.Give it the full 24 hours plus to dry

The product was great on the tub, it looks beautiful. There was a strong odor while applying it but that went away. The issue I have is that you have to dry the tub every day. It does not dry! the water droplets stay on and the care instructions say that you have to wipe it down each day. I was not expecting that extra step.

Do not use this product landed me in the hospital even in well ventilated area with respirator

Expensive but good for touch ups

Finish seems like it will be durable but was a pain to apply since it sags easily if put on too thick.

O have used several tub and tile restore kits and every one of then failed within a few months after it had been applied. So this was going to be my last try before I go out and buy a whole new tub and surroundings. I'm amazed how this product was laying down for me and able to apply second and third coats within minutes of each other . Strong high gloss finish looks great The only thing I recommend is supply your own foam roller. Reason, from the two kits I used both of the foam rollers that came with the kits did not hold up to square footage of my projects and began to come apart leaving a undesirable finish like sand and minot foam pieces. I corrected this problem by purchasing a much better quality foam roller. Than what is supplied. . Over all I still rate this product a 10 ,10 being the highest even with the roller issue . It sure beats the other kits that one has to spay on and apply 2 or 3 coats what a mess . Bathworks has easy cleanup which is a big plus in my opion

Good quality. So far so good

Rating provided by a verified purchaser

The roller is terrible quality. Just be gentle with it. Otherwise it went well. Thanks

Worked alot better than I thought it would. Great product

It was so easy after watching the vids,i can't believe i did it by myself so neatly

Pretty easy to use,just follow all of the included instructions,hope it lasts a long time

Came without the fiberglass repair solution.

The roller fell aprt during application and left particles all over the tub ruining the finish . Very poor brushes . Seems the paint is quality but the brushes are cheep .

easy to apply, looks great

This tile/tub paint works great! Secret is prep like the finish depends upon it, because it does! Helpful tip...Before you use the primer take a razor blade, and make sure the surface is clean (no leftover residue). Ventilation is key, this stuff really stinks! If you have a respirator mask, even better.

Product was easy to use. Instructions were easy to follow. The tub turned out great!

Rating provided by a verified purchaser

This product is easy to use and works great. Make sure you prep well and completely cover the surface with the supplied etching. We used foam roller covers instead of those supplied. With proper prep, The results will be better than expected.

Tried this product on wall tiles first. Everything thoroughly prepped and according to instructions. Came out absolutely awful. Had to strip of entirely and redo with proper Rustoleum spray paint that came out just perfect. Second chance? Did the floor tiles as what could go wrong on a flat horizontal surface - just as aweful. This has to be gone from the market

the final finish. it's amazing how bright it is.

This kit was used to refurbish a shower stall floor. It did not come with Anti-Skid Additive, so the floor is now very slippery. The instructions say to apply the paint thickly, not to dry roll. I wanted a thick coat, but the problem is that the paint does not self-level so now there is an uneven appearance to the floor.

Amazing results