Customer Reviews for DIABLO Tracking Point 7-1/4 in. x 24-Tooth Framing Circular Saw Blade Value Pack (2-Pack)

Being a Covid new carpenter and small projects and minor repairs I needed to fine trim a table project. Popped this blade on and cuts smooth as advertised. Went straight out and bought a 12” for my mitre saw. Great product.

I always used to buy cheap blades and throw them away but after using one of these i will never go back to the cheap blades, I'll just wait until these go on sale here and there. I have the Kobalt 7-1/4 sliding miter saw and i used this blade on it... using the stock blade it was OK and cut fine but with this blade it cuts sooooo smooth it's ridiculous.

Wife bought a very thick countertop, and it needed ripped the whole length and trimmed on the shorter dimension. This blade was flawless! I used a cutting guide and put painters tape on surface to help avoid chipping. Worked great.

FANTASTIC SAW BLADE - I picked one of these up for ripping sheets of 3/4" mdf - I cut close to 300 linear feet and the blade still looks brand new. With my M18 Circular Saw I couldn't push fast enough to slow the blade and inhibit performance. I couldn't believe how quickly this blade cut through the mdf and how little effort it took. I've also cut 3/4 plywood, 5mm underlayment, and solid walnut, all with great results. The mdf had no tearout at all

It's the best brand to cut that I know

I'm cutting fiber cement boards for my 700 sq ft cottage and even though the diablo blade is not meant for this,it's doing a great job so far. I'm halfway there(using 230 12ft boards) and it's still going on strong. Even if i have to buy another blade to finish the job,it's only $9 that I'll spend. Beats buying a cement cutting blade well over $50! Will definitely be buying this type blade for all my construction use.

Best blade ever

Ok

I only use Diablo Blade's. I've tried the rest and found the best. They improve the battery life of my cordless saws'. They cut clean for the life of the blade. No other blade preforms better on treated lumber.

Nothing special about this blade it cuts

I'm a heavy use of all saws, per experience can't go wrong with this brand.

The framing blade cuts through lumber like a hot knife through butter.. I know that sounds cliche but it's the truth so if you're looking for a good blade to do framing work with look no further than the Diablo

It is very good blade, cuts very fine and precise

Woah! This blade will be bronzed. It will be passed down from generation to generation with each descendant inscribing his name. These blades are LEGENDARY! When its really cold out and my car wont start; I ride my circular saw and these Diablo blades still have enough in them to frame all day. In fact I heard that they use metal from Casey Jones's hammer in each one. Try it; you'll be amazed.

Love these blades

Blades cut thru nails still sharp

A few weeks ago I bought this blade and used it to cut 3/8 plywood sheathing. It made clean cuts both with the grain and as a crosscut saw.

I have been using it for ripping 3/4" PT plywood, and it does a great job. Thank you for asking!

I was first exposed to Diablo circular saw blades over 10 years ago and have been running them ever since. High quality, durable, no vibration clean cutting, cuts thru wood smooth as silk. I was lucky enough to find this blade in the 2 pack promo set. I used it to replace the stock blade on my cordless 18 volt brushless Ridgid circular saw, not only does it give me better cuts but it has also increased my battery runtime. If your looking for a high quality replacement blade look no further.

great cut, long lasting, great price... Diablo has always been a solid blade. Look at all it has cut this year! Just 2 blades!

The Diablo 7-1/4 Framing Blades were a great deal Buy 1 Get 1,I have used these before and they are excellent.My landscaping project went perfectly,the Diablo Blade cut the landscape timbers perfectly.I'm building raised planting beds in my back yard.

I had the pleasure of trying to cut 13 Sheets of 8x24 foot 1/2 inch OSB with my Brand NEW DIY Ryobi One 5.25 in Saw. Good Little saw but not for real Jobs & Yes I know... Those are the Largest OSB Sheets I have ever seen! I only got threw 2/3s of the 1st cut of the 1st 3 sheets & the little guy gave up. SO... Was very lucky the person selling the wood loaned me his Skilsaw to make the rest of the cuts that day. I returned the following day with my Newly Purchased SKILSAW w/Diablo blade & an extra Diablo Blade... I gave the Blade to the Gentleman who had loaned me his saw the day before as a Thank You for helping me out. So set the depth control & proceeded to cut 5 deep OSB boards like a Hot Knife threw Butter! All 6 Cuts where done within minutes & I can not brag this Saw Blade up any more than what it is... An Outstanding Saw Blade! Looking to Purchase more for my other saws as well!

This thin kerf saw blade was just what I was looking for to replace an old chipped blade that came on a used table saw I bought. On first use I was convinced it was a great choice, even though I knew Diablo blades were superior. I've used this blade dozens of times by now and continue to appreciate how smoothly it cuts, with no tear-out on the wood. I'm sold on Diablo blades.

great quality saw blade for all purposes, perfect for my saw

Cuts like a hot knife through butter, compared to the old worn out blade.

Came earlier than expected witch was great