Customer Reviews for DIABLO 8in. x 12-Teeth Carbide Stacked Dado Saw Blade Set

Excellent right out of the box. After several projects completed found no issue with depth or width of cut or even quality of cut changing versus initial use.

Great quality, great price, great packaging. Never disappointed with Diablo products.

Cut just fine first few times at different widths. When I stacked them to the max, battery table saw wouldn't get to full speed .

Easy to set up and use. Makes excellent cuts with and across the grain.

This dado blade set states it is 8 inches, however, it is larger than 8". When I mounted this dado blade set on my Sawstop with the dado brake I could NOT get the minimum clearance between the blade and the brake per Sawstop instructions. I then called Sawstop and they said to check the diameter of the blade set and that the maximum diameter of a dado blade COULDN'T exceed 8 inches. I then pulled off the new dado set and measured the blades and they are 8 1/8 inches, which is 1/8 too long.

The dado blades were easy to set up and adjust with the enclosed shims and instructions. Was worth the price.

Not happy with it. I had a cheaper set that did less chipping. I’m going to return it.

Good set nice flat bottoms

It was better than expected. It works really well

Love the precision and fine tune ability with the shims provided. Excellent cuts. Well worth the price. I use diablo blades on all my saws and highly recommend them

This set is labeled as 8” but it is actually about 8-5/32”. This doesn’t matter on conventional table saws but if you use it on a Sawstop it will activate the brake, destroying the blades as well as your brake cartridge. They make another set that is a true 8” that will work with Sawstop, which is part number SD208S, however HD doesn’t carry it at this time.

I think it was a bit pricey but the quality is second to none. The store staff were very helpful.

Plywood disfigured when putting finish on it

Cuts great and easy to follow directions

Nice blades however a lot of tear out in soft wood,

I just use this one time and now most of the carbure teeth are broken.

Great blades the chart in package tells you exactly what shims spacers and chippers to add for the perfect size cut

I used the two blades to make 1/4 inch cut for finger joints and the blade is already dull and chips on the back side. it's a crappy blade and now what do I do.Sharpen them evey two times I use them.

Works great, easier to set up than router table. Also grooves face grain vastly better than router table.

It cut excellent without leaving grooves and the 8 inch diameter fit my application well

Follow the diagram and instructions for which blades , Choppers and shims to use and verify by stacking the blades on the table saw for depth of cut... check, very smooth cuts no clean out needed!! check..

Excellent results, great price. Don’t know yet how long it will stay sharp, so I can’t give it 5 stars. But Diablo makes excellent blades for the price.