Customer Reviews for General Tools Wireless Digital Thermo-Hygrometer with 1 Remote Sensor and 90 ft. Range

Accurate readings

Easy to read and set up works great.

So far, so good. The readings seem accurate, and the hygrometer does beam a live signal to a receiving unit that is somewhat distant. It was easy to install and the signals did synchronize correctly, as indicated in the instructions. No complaints.

POORLY CONSTRUCTED AND DESIGNED THERMO-HYGROMETER. Purchased an inside/Outside wireless digital unit and was sent this piece of junk. Not the product described, wrongly represented product description. All of our inside/outside thermometers have clearly designated images for inside outside temps. General Tools failed this customer and Home Depot should do a better job in screening what it sells to its customers. F++

I used this in my craw space to keep the moisture Under 50%

works great and fast delivery, thanks

not sure how precise the reading is, however, it does seem to be in the correct ballpark of measuring the humidity in a difficult to get to crawl space. Good to keep track of humidity under the house.

Rating provided by a verified purchaser

Works as advertised.

Easy to setup. Routinely reads no temp or hydro and when it does it is off by close to 10 degrees. Have a much more reliable oregon scientific that jibes with a la cross. I can't say enough about not wasting your money on this product.

I am very satisfied with this product. Some things i would like to see done better is that it seems to get out of sync if the remote temp/humid. sensor power is removed. The fix is easy... just take the batteries out/put back into the receiver unit. Just seems a tad clunky of a fix, but not a big deal. I will admit i didn't read the manual, so maybe i'm doing something wrong. The other thing (which maybe i'm alone on this one) is that i would like to see the remote sensor unit have an optional power-pack input jack. Mine is being used to monitor humidity levels in my crawl space, and i really don't enjoy going down there any more than i have to, so i jerry-rigged my own power pack to keep it powered up all the time, but would have been nice to have this as an option without having to bust out the soldering iron. :) On the positive side, it maintains min/max for temperature and humidity both locally and on the transmitter unit on up to 3 different remote units. So far, i'm extremely happy with this product, and it is meeting my needs nicely.

I use this system for my well pit to make sure my temperature does not drop below freezing during the winter. I am very pleased.

I have four different hygrometers and this one is my favorite because of it's simple to use features, look and the remote unit that tells the humidity/temp in another room. All the hygrometers read within +/-5% of each other, plus when I move them around the apartment they slowly change to reflect what the other hygrometer was reading +/-5%. Not too bad. The little "frown" face shows up when it's below 40% humidity which is a nice touch.

Simple to install and monitor remotely. Wish it had a 24 hr display of hi/lo readings.

I used this with 2 additional remote sensors. It performs great. It can receive the 3 sensors in the attic with the main unit on the 2nd, 1st or basement levels.