White 4-Point Pinlock Suspension Cap Style Hard Hat

This Bullard suspension hard hat is light weight and easy to wear. It comes as two separate pieces in a plastic bag with the white hard hat shell and the suspension system. Assembly is pretty easy, you line up the four points with the groves and insert them until they are fixed. At the front of the hard had, the suspension system has a thick padded cushion for your forehead. At the back, it has an adjustable band so you can modify the size to fit your head just right. The front of the hard hat has a nice bill to shield your eyes from the sun and also to deflect anything that might fall away from your face.

I’m not a head helmet expert but this model is pretty good quality example . I believe this would work well around a light workplace for general usage. Do not believe it would hold up for serious head injury protection in commercial use. The adjustable headband fits well and allows you to snug up the helmet to your liking. I will use this for tree trimming and light construction around the home.

Okay its a hardhat and most of us don't like them until they save us or someone we care about. Its one of the basic pieces of safety equipment we need if we work in any type of environment where things fly, fall or can hit us in the head. No one would go to work without the correct footwear and hard hats are one item that goes with a good pair of boots. And just like boots, hard hats need to be replaced every so often, at least every 5 years but really if your out in the weather and sunshine every two years is more like it. And lets face it these things really start to stink after two years. This hardhat has a fully adjustable head band (from 6 1/2” to 8”) attached to the suspension system and a nice new sweat band too. This hat also has slots for add-on face shields, hearing protection among other things. We all like and get attached to the stickers and what-not we put on these but face it every one wants to go home at night. A new hardhat is cheap insurance so we can stay at work and not end up is someplace way worse. A new hardhat is a great reason to bug suppliers for new stickers too.

A comfortable, adjustable white hard hat that is perfect for managers, engineers, foremen or supervisors on the construction site. Fits adult heads, and child's head as well. Plastic is rugged and resists scratches. This hard-hat is made in the USA!! There are no vent holes, but i find them unnecessary, as there is plenty of ventilation around the suspension headband & inner helmet. Additionally, it will keep dust & debris out of your hair. You really can't go wrong with this helmet at this price point! RECOMMENDED

The Bullard 4-Point Pinlock Suspension Cap Style Hard Hat in White and with the turn-style easy adjustable knob for me is the most comfortable & efficient from others I’ve experienced. Comfortable from the padded & adjust-on-the-fly suspension strap. Efficient because this style suspension strap requires minimal adjustment throughout the day and does not require full removal for such adjustments. Two thumbs up!

I have been a builder remodeler for 49 years, and as such I have many opportunities to use hard hats like this BULLARD WHITE 4 POINT PINLOCK SUSPENSION CAP STYLE HARD HAT. These are a valuable item to have when working on job sites where hard hats are required. And they come with an adjustable headband, which means they will fit any person’s head, no matter the size.

This hard hat is very good for home owners. As a home owner I use my hard hat in tight working locations. I use it especially whenever I adjust my garage door because I have to be under the rails which have sharp edges, and moving my head around to see better and forgetting the sharp rails, can cause me injuries. I also use my hard hat whenever I am on the ground and I cut tree branches because the falling branches can deflect from other branches and come on my head. This hat is easy to adjust wear.

Since I have recently started to do my yearly tree trimming work, I decided to get a hard hat as a safety, just-in-case measure. This Bullard hard hat is just what I needed at a good price. It is comfortable, relatively light, easy to adjust to even my big head, and the suspension system allows my head to stay cool. The low profile is also nice as I don’t have to constantly be thinking of how much it sticks up off my head when I am up a ladder in a tree. It did not come with a chin strap, but I have found it to stay securely on my head very well. The pillowed brow pad is a great touch, and the fact it is replaceable is nice. I will not be wearing this for hours at a time, so I cannot speak as to how comfortable it will be under those conditions, but for the hour and a half I did wear wear it (about how long I usually do) it felt really good and was not distracting for someone who only occasionally wears a hard hat. It is also easy to clean. It is made of hard plastic/resin and is made in the USA. Overall, it seems to be sturdy and should provide adequate protection for my needs. One disappointment is that the instructions on assembly of the hat (putting the suspension system in) are terrible; it took me about 20 minutes to figure out to get it all right so that it worked correctly (I had to look closely at the pictures on the plastic bag it came in, which is where the instructions are, to figure out what to do). This is the only drawback to this item.

I received my Bullard white hard hat today; this is a low-profile hat, which is helpful when working in confined spaces like an attic. It has a 4-point 1/16-inch incremental pin-lock adjustment, which works perfectly for me. Also, it has a front and rear adjustment height. Overall this is a compact easy to adjust hard hat with replaceable brow pads (cotton or vinyl).

The shell itself is fine and will provide adequate protection for common construction activities. Other than that I feel that I had to spend way too much time getting the gray head support section installed on the shell. The head support internals on mine were bent out of shape. I even inadvertently gave my blood as I cut myself trying to manipulate the tab inserts. The instructions are minimal and a bit confusing as there are pictures of an adjustment knob in the back to tighten or loosen the gray plastic support structure on the head which is not present on this model. There are 4 white plastic tabs that need to be inserted into the shell which were not oriented correctly. One of my tabs came off the gray support structure and then it took way to long to figure out the right orientation so that the head strap was straight. The head support section has various head measurements to help with proper sizing. Once completely put together and sized properly it seemed to be usable. I don't understand why it did not come fully assembled with only a sizing adjustment to be completed. Really frustrating.