Fusion Pro #380 Haystack 1 Gal. Single Component Grout
$6282
Pay $37.82 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Ultimate color consistency, no efflorescence - #380 Haystack
- Unsurpassed stain resistance with no sealing required
- Ready to use, easy to spread and clean
Product Details
Specifications
Questions & Answers
268Questions
Q:Can fusion pro single component grout be used for grouting a shower surround with 12x24 LFT tile?
by|Jan 18, 2023
1 Answer
Q:How many gallons do I need to cover 1000sq. Ft
by|Jan 7, 2023
3 Answers
Q:Has this been discountinued?
by|Dec 20, 2022
2 Answers
Q:Is this a sanded grout?
by|Dec 10, 2022
1 Answer
Showing 1-4 of 268
Jan 12, 2023
It can be dry cleaned.
I am 70 years old and have zero experience in bathroom remodeling, I had to change the rotten floor in my bathroom and I installed ceramics on the floor and walls, due to inexperience some of the tiles left me with different separations, I needed a grout with a sealant to avoid problems . I found FUSION PRO and took a chance. I was afraid of the work time because I get tired quickly so to begin with I grouted a 12-inch tile, I analyzed it and I didn't like cleaning it with water. By accident I left a part uncleaned and with a paper towel I managed to clean it. I gave up the sponge, the water and the fiber towel, I started the real work with a two-inch steel trowel to embed the grouting in the cracks as compact as possible, I only had about two inches of dirt left on each tile of the two that I joined With the grout, after three tiles were ready, I would stop and clean the residue by rubbing the dirty part with a sheet of kitchen paper towel: EXCELLENT RESULT. on the 5 by 8 foot bathroom floor I used less than a quart of Fusion Pro. It took me longer to get the grout into the groove than it did to clean.
by
Dec 29, 2022
Fast and furious
Must work fast, less than 5 minutes to apply and wash it off. Very happy with the result.
by
Sep 16, 2022
Won't Be Purchasing Again
We have purchased a total of 3 buckets of grout in color Rolling Fog trying to get a consistent color. all 3 have been completely different colors, quite obvious different colors. We followed the guide on the bucket as to how much we were going to need for our project and only purchased 1 bucket to begin with. Well we realized over halfway through the project that 1 bucket wasn't enough so I went to the store and purchased another one. They no longer sell this color in premix in the store so I purchased the powder in the same color, same number, etc. so in theory all we had to do was add water. Wrong! It was almost a charcoal gray and no where close to the original bucket. I went online and ordered a bucket of the premixed in the exact same color and it is also significantly darker than the original. Now we have 3/4 of our project done to now have to go over the entire thing again in a different grout to have the same color. Have yet to find another Rolling Fog the same color.
by
Jun 10, 2022
great for backsplashes, not for showers
I'm contractor. I have used this for the ease of installation and lack of mess. It's perfect for backsplashes. But I used it on two shower floors in 2020 and was called back to both jobs within 8 months because the grout had failed. It doesn't cure hard like the powder mix. It's been a costly nightmare dealing with replacing this grout. I will never use it in a shower again. I Also used it on a tile deck, and it didn't last 6 months.
by
Apr 28, 2022
Good product
Simple to use. Followed the instructions and our project turned out great! Do wish there were a smaller size as we still have about half a tub left but the product worked very well.
by
Apr 27, 2022
Super easy to use grout and cleanup was a breeze....
Super easy to use grout and cleanup was a breeze. Left no have on my glass mosaics or my glazed ceramic tiles. I’ve used Prism before, but think I like Fusion Pro better for ease of use. Hopefully this stuff will last stain free.
by
Feb 12, 2022
Easy product
1st time using this product and couldn't be happier. Premixed and easy to apply. I'm grouting large format tiles 24 x 48 so I taped off Grout lines applied Grout as directed, hit once or twice with wet sponge to clean lines and then simply removed tape. No over spread or messy smearing.
Using paper towel to remove haze after sponge saves cleaning microfiber cloth repeatedly
by
Dec 22, 2021
This Fusion Pro Single component grout is very user friendly and easy to apply. I used on 1/8” joints between subway tile and am so pleased with outcome. Material can easily be adjusted to your desired look with the swipe of the tool or cloth.
Quality Product, looks amazing!
by
Nov 16, 2021
Recommended by our contractor
Hired a contractor to install porcelain tile flooring in kitchen and bath and this is the brand he insisted upon--said it's the best and we will have no problems with it.
by
Nov 3, 2021
Slow To Install, Possible Sagging, But More Flexible and Stain Resistant
I purchased the Fusion Pro for the guys to use when installing our tile--both for the outdoor tile on the porch and for the backsplash tile walls in our kitchen. It is supposedly more stain resistant and flexible than ordinary sanded grout (flexibility is important for outdoor tile). The installers grumbled about the choice; it dries faster than normal grout and must therefore be worked in small sections--applying grout then washing the tile clean. They said it took them much more time to install than normal grout would have required. And for the backsplash wall, they said the Fusion would "sag" in the vertical position, so only their most experienced technician was allowed to install that grout. We did have one small section where the grout sagged, creating an appearance of holes in that grout. Otherwise, it looks great! Now we await the years to learn more about staining, especially behind the stove. Note: the information about the grout says that sealer must NOT be applied to this grout as it may damage the polymer in the grout.
by
Compare Similar Grout
 |  |  |  | |
| Brand | Custom Building Products | Custom Building Products | Custom Building Products | Custom Building Products |
| Name | Fusion Pro #380 Haystack 1 Gal. Single Component Grout | Fusion Pro #19 Pewter 1 Gal. Single Component Grout | Fusion Pro #09 Natural Gray 1 Gal. Single Component Grout | Fusion Pro #60 Charcoal 1 Gal. Single Component Grout |
| Price | $6097 | $6097 | $6097 | $6097 |
| Ratings | (1600) | (1601) | (1600) | (1603) |
| Product type | Single Component | Single Component | Single Component | Single Component |
| Flooring Material Features | Antimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Stain resistant | Antimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Stain resistant | Antimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Stain resistant | Antimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Stain resistant |
| Maximum coverage area (sq. ft.) | 627 | 627 | 627 | 627 |
| Location | Bathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround | Bathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround | Bathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround | Bathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround |
| THD SO SKU | 1000114793 | 1000114845 | 1000114780 | 1000114782 |
| View Product | View Product | View Product | View Product |
Related Products
