Caseta Wireless Smart Fan Speed Control and Remote Kit, White

A:  Hello! The PD-FSQN will not work on a Fan that comes with its own wireless remote. If a fan comes with a wireless remote, it means that it has a built-in transmitter that will interfere with 3rd party fan controls such as ours. The PD-FSQN will only work on ceiling fans that are pull chain operated with no other means of control. If you still have questions or concerns, please give us a call at 1-844-LUTRON1. We're here 24/7, so you can reach out any time, day or night.

A:  Hi, Jeff, thank you for your question. The Caseta Smart Fan Control is designed to control a standard 3-speed ceiling fan which ideally only uses pull-chains to adjust its speeds. A fan that has its own remote or wall control typically uses a proprietary control technology and would likely be incompatible with a third-party fan speed control. We suggest you reach out to the fan manufacturer to verify if this control would be compatible with their fan should the remote control receiver be bypassed. We hope this helps! If you have additional questions, please reach out to our Support Team at support@lutron.com or give us a call at 1-844-LUTRON1.

A:  No you should ask the original manufacturer to send you a new remote

A:  Yes it will work. It simply replaces your wall switch. There should be no other control devices installed on the fan since the Casita will take over the job of Controller. 

A:  Hello! The PD-FSQN rating is as follows: up to 1.5A single ceiling fan; single pole only. If you still have questions or concerns, please give us a call at 1-844-LUTRON1. We're here 24/7, so you can reach out any time, day or night.

A:  No. It only controls the fan.

A:  Hello, thank you for your inquiry. The PD-FSQN Smart Fan Speed Control is only rated to control fans and will not also control the lighting in the fan. Within the Caseta product family, two different devices would be needed for this application: a PD-FSQN for the fan and a dimmer or an on/off switch for the light. Alternatively, if you were willing to forgo smart home functionality, our Maestro LED+ dimmer and fan speed control, model MACL-LFQ, may meet the needs of your application. It requires separate wires for fan and light in the wallbox and can both dim LED lighting and change fan speeds, all on one single-gang device. See the below link for more information: https://www.homedepot.com/p/Lutron-Maestro-Fan-Control-and-Light-Dimmer-for-dimmable-LEDs-Incandescent-and-Halogen-Bulbs-Single-Pole-White-MACL-LFQH-WH/303169873 We hope this helps! If you require further assistance, our 24/7 support team would be glad to assist. We can be reached at 1-844-LUTRON1 or by emailing support@lutron.com.

A:  No. This only works the fan. You need to separate the light switch wire and add another separate switch to control the lights. Easy if you have room in the current wall box. I have several of these in my house. They work great.