A:  Save yourself the trouble, call a local electrician or get a referral from Home Depot. 

A:  Hello Rust, thank you for your inquiry. This Skylark fan/light control, like all of our other current fan and light combination devices, requires at least three wires in the wallbox for installation; in addition to the power feed, separate fan and light switch leg wires are needed in order to individually power and address each load. Unfortunately, a two-wire fan and light combination unit is not offered at this time. See below installation guide for more information: https://www.lutron.com/TechnicalDocumentLibrary/0301992.pdf We hope this helps! If you require further assistance, please reach out to our 24/7 support team at 1-844-LUTRON1 or via email at support@lutron.com.

A:  No. If you are looking to control a fan with light kit independently you'll need 3 wires.

A:  No. it will only dim incandescent and halogen bulbs

A:  The S2-LFSQ is rated for 300W of incandescent/halogen lighting loads. Lutron does not recommend using this fan/light control with LEDs. Instead, Lutron suggests the MACL-LFQ, which is rated for 75W of compatible LED loads. To see which LEDs are compatible with the MACL-LFQ, please visit www.lutron.com/ledfinder.

A:  No, it is made for incandescent and halogen bulbs

A:  Yes this does work with led lights. I have a hunter fan with led lights and this works great! Just make sure that your led lights are dimmable.

A:  yes

A:  Lutron will replace the slider knobs for free. Call into our Customer Service Dept. by calling ( 1-844-588-7661 ), and asked them to send you out the ( split knobs ), for the Skylark fan & light control, model number ( S2-LFSQ ).

A:  You need to use dimmable light bulbs

A:  We are here to help. Please contact our TOLL FREE, 7 DAY, 24 HOUR, Technical Support Hotline at (1-800-523-9466 , where you can troubleshoot the problem with a live technician.

A:  i have many of them and they work fine over many years. get a new one