14 in. L x 1/2 in. High-Density Pro Woven Roller Cover

Wooster paint hardware is my preferred brand. Recently and over the last 2 years I have performed may projects at my home and for others (friends and family mostly) when painting I have used many different paint hardware products and Wooster has become my favorite brand and 1st choice. I have not used the 4” roller yet and I wanted to see how it performed. The roller cover was made very well, I do prefer the plastic roller casement the mat is affixed too, as it slides on/off The roller a liot easier Than the cheaper cardboard tubes. I like how it fits, the quality of the product is very good.

I would highly recommend it. It is affordable and does the job.

To be honest, I was expecting a 4 inch mini roller cover but it was actually a standard 4 inch roller cover. I hadn’t used one of these for probably 30 years but decided to use this roller cover instead of a mini roller to paint three six panel interior doors to try it out. The roller cover tested was the Wooster Pro 4 inch with ½ inch nap. (Yes I know that you would normally use a ¼ or 3/8 inch nap for a lightly wood textured door.) The roller cover was somewhat difficult to load with a latex primer from a paint tray. The roller cover tended to not roll easily but slid more on a metal paint tray (probably because of the 1/2 inch nap). However, the Wooster Pro 4 inch roller cover did hold paint well and released it well on the surface. One of my favorite features of the Wooster Pro 4 inch roller cover material was that it did not leave any fuzz on the paint surface. It also did not splatter any little paint droplets like some roller covers do, especially those with the thicker nap. This Wooster Pro 4 inch roller cover did leave some bumps on the painted surface that looked like unpopped air bubbles (see photo). On the first door I used a brush to initially paint around the raised panels but decided to use the roller for the other two doors. Surprisingly due to the size and amount of paint that the Wooster Pro 4 inch roller cover held it worked very well on the raised panel area of the door. I slid the roller is the recessed area first to deposit paint and then rolled it out. I also used this roller cover to prime a small area ( 2ft x 3 ft) of patched drywall in preparation for painting. It worked very well for that application leaving no cover material in the surface and no splatter. It produced a very uniform finish. I would definitely recommend this Wooster Pro 4 inch roller cover if you have a need for a 4 inch standard roller cover. I would definitely try the 9 inch version next time I paint a room.

Very pleased with this high quality roller. Material is soft & holds quite a bit of paint but does not leave fuzz or strings. Plushness allows one to easily fill in small groves. I painted some older paneling in our spare room . I went vertical for my first swipe, then horizontally once or twice to fill in the small groves and finished with a vertical swipe. Took longer to write the do :) Making a nice straight edge was easy to doe. Sturdy inside plastic cylinder. Paint washed out easily when finished. Only problem I had was my old roller had a slightly smaller insert than what should have been used.

So if you are like me and don't like painting you want to do it right the the first time with a product that is going to do one thing and that is just work and work right. These rollers high density roller covers from Wooster. Soak up alot of paint. They cover well and they do not leave lint behind in your paint. Do it once . Do it right . Do it with Wooster

Works great did not shed . Leave a great finish . I have used one 14 inch on 5 different jobs so far . Not one issue

Great roller cover. Really helps getting larger area walls done alot faster and smoother than your normal 9inch roller.

Works everytime . Leaves a great finish everytime

Jcb Painting say's, "great roller cover. I get the job done in 1/2 the time with great results".

No fuzz, no problems. This is a great paint roller cover. This is a 9" (standard length) paint roller cover with 1/4" nap. I prefer 1/4" nap rollers for smooth surfaces (flat drywall) because it gives a smooth finish. This roller cover is good quality, no fuzz or fluff comes off the roller messing up the smooth finish. The edges are clean and trimmed so you do not have trouble with lap lines on roller strokes. I will use this roller again for my next paint project. Completely satisfied.