Questions and Answers for 1 in. x 6 in. x 12 ft. #2 Tongue and Groove Pattern Whitewood Common Softwood Board

A:  it all depends. if its exterior or interior. if its indoors there should be no issue to go directly over existing wall covering. if its outdoors, its recomended to have some sort of breathing room where air can flow under the siding. you may need to install strips over existing siding in order to ensure proper ventialtion. please check your local building codes, as the requirements differs from region to region.

A:  These boards can't be used structurally, but they can be installed as a wall covering on 24 oc studs.

A:  You do not need.to let season, you can paint it right away

A:  If the flip side of the boards are protected form the elements like rain and sun. You don't need to paint all 6 sides.

A:  flooring glue, you wont be able to nail into the backer board / cement.

A:  wood will expand and contract with the moisture in the air. There should be no issues doing your cabin ceilings with Pine. The only recomendation is to place the boards in the cabin 2 weeks before the installation , that way, they will acclimatize to the envorinment and that will prevent shrinking and cracking.

A:  Use a sealer that has UV inhibitors. The sun exposure is what makes the wood change colors

A:  Hi Rick, unfortunately 12ft is as long as we go.

A:  66pcs of 12' will cover the two sides of the vaulted ceiling that are 18'wide x 9 feet tall.

A:  Depends where....most soffits need ventilation if installed on a house to ensure air flow in the attic. if used over a covered porch it would depend on local buildin codes.