A: Yes, the handle is threaded to receive all standard extension poles. Thanks,
by|Jul 24, 2023
Q:How many times can you wash and reuse? Can I use other replaceable brand mini high density rollars with this frame? (Wooster 4.4 length).
by|Jun 11, 2021
2 Answers
Answer This Question
A: This item suck's, it fell apart while I was painting. Now there are hardened clumps of foam in the finish of my tub.
by|Jan 1, 2024
19 found this answer helpful
A: Reuse depends largely on how roughly the roller is used, and how thoroughly it is cleaned. Under normal circumstances, this roller should last for several projects. Any mini roller with a standard insert (not an open core) will fit this frame. Thanks,
by|Apr 1, 2023
1 found this answer helpful
Q:I bought this to apply satin paint to primed bi- fold doors. Should I have used a 1/4 nap instead? I want to change to semi- gloss paint.
by|Jun 11, 2021
1 Answer
Answer This Question
A: A 1/4in nap roller will generally give you a slightly better finish than a 3/8in nap roller, especially with a higher gloss paint. However, the 3/8in nap will hold more paint and still do a good job with the finish. Thanks,
by|Mar 28, 2024
18 found this answer helpful
Q:How well does counter top paint hold up to daily use , do u have to apply a protective coatinof some kind afterwards ,
by|Apr 7, 2021
1 Answer
Answer This Question
A: "Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 1-800-466-3337 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question."
by|May 18, 2023
20 found this answer helpful
Q:Does this foam work with Rustoleum Tub and Tiles paint?
by|Dec 14, 2020
2 Answers
Answer This Question
A: KP you need to use the correct tool for the job not just any tool
by|Jan 16, 2024
A: No. Don’t buy it. Mine fell apart as I was painting. Get something better.
by|May 18, 2023
20 found this answer helpful
Q:Best roller and brush to use to refinish a bathroom tub
Thanks
by|Jan 11, 2018
3 Answers
Answer This Question
A: Yes
by|Apr 1, 2023
1 found this answer helpful
A: The roller not strong enough
by|Apr 1, 2023
1 found this answer helpful
A: The answer depends on the manufacturer's recommendation for the specific refinishing product you purchase, so be sure to check the carton/container before you start. That being said, most manufacturers recommend a foam brush, high quality paint brush and/or a high quality, short-napped roller (like a 1/4in nap or 3/8in nap). For the roller type, be sure to choose either high-density foam or a woven fabric for best results. 4in or 6in mini rollers will be the easiest to work with on a project like this. Thanks,
by|Feb 24, 2024
4 found this answer helpful
Q:Just bought this, used it with behr paint but forgot to clean it. Q1 what can I clean the paint with? Q2 Must I clean it to use with the same paint?
by|Dec 11, 2017
3 Answers
Answer This Question
A: Unfortunately with the paint dried it will be very difficult to clean up a foam roller. A solvent strong enough to soften the paint could also damage the adhesive holding the foam onto the core of the roller. You could try soaking the roller in warm water with a little dish soap for several hours to see if that works, but if you have the time please reach out to us directly at linzerthd@linzerproducts.com Thanks,
by|Apr 1, 2023
1 found this answer helpful
A: Water or paint thinner
by|Jul 2, 2023
2 found this answer helpful
A: I paint a lot in my home, & my tip to keep your rollers & brushes ready for use, is to wrap in a plastic bag & store out
of heat, I also read that putting in the fridge is ok but the bags work so well, my Hubby gets the daily newspaper so I use
those wrap nice & tight, best of luck BOD
by|Jul 2, 2023
6 found this answer helpful
Q:Can this 4" roller frame be used with both 4" and 6" foam rollers?
by|Jun 5, 2015
3 Answers
Answer This Question
A: No, this is only for use with a 4 inch roller.
by|Apr 1, 2023
1 found this answer helpful
A: Yes it can. There is a larger frame specifically designed for 6in rollers (sku 458 051) that will only work with 6in mini rollers. However this frame will work with either.