Questions and Answers for Air Cool Hawkins 44 in. Tarnished Bronze Ceiling Fan Replacement Light Kit

A:  Yes, this light kit will be compatible with UPC 792145357360. However, this is the exact same light kit as your original. It uses 3 E12 size sockets and requires candelabra bulbs. The bulbs you use on the light kit don't have to be exactly the same as the originals (which have been discontinued). As long as the bulbs you find have the same candelabra base and do not exceed 40 watts each you can install them on the light kit.

A:  Yes, if the LED bulbs match the E12 socket size they can be used. The original incandescent bulbs for this light kit are 40 watts each so that translates to LED bulbs that are 6-8 watts each.

A:  The angle of the picture obscures the 3rd socket; this is the correct light kit for the Hawkins fan model you are looking for. It has 3 E12 sockets.

A:  The switch cap for this model fan cannot be removed. Please call Customer Care for assistance if needed. 1-877-527-0313

A:  Mine did.

A:  No, this is light kit only. Glass available: https://www.homedepot.com/p/Air-Cool-Hawkins-44-in-Tarnished-Bronze-Ceiling-Fan-Replacement-Glass-122855010/206118313

A:  No

A:  The one I purchased did not include the glass bowl.

A:  No, it doesn't come with the coupling that connects to the ceiling fan.

A:  Yes, this will have the switch cap with 3 screws and cut-out for reverse switch at the top of the light kit.

A:  I managed with pliers on either side of the white plastic tubes on each wire. I recommend do not be forceful ..just firm. It may be necessary to depress the tabs in the slots. I used needle nose pliers, I have for electrical projects in amateur radio.I have seen pliers like that for fly tying. Nevertheless, I thing any pliers or even channel locks would grip well enough to gently pull it apart rather than break it.

A:  I had the same problem. The wires just pull straight apart at the white plastic connection. There is no instructions that tell you this! The white connection piece comes apart in the middle, but it is pretty snug, so it takes a good tug!

A:  Firmly pull them apart one at a time. Hold each end of the white plastic connector clip as not to damage wiring.

A:  You will need to just pull them apart.

A:  I have an extra tarnished bronze colored one if you want it.

A:  Hi william, unfortunately we do not offer parts (including nut covers) for the Hawkins 44 in. Tarnished Bronze Ceiling Fan Replacement Light Kit as singular purchases on Homedepot.com. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!