Questions and Answers for BEHR PREMIUM 1 gal. #ECC-63-2 Aspen Snow Urethane Alkyd Satin Enamel Interior/Exterior Paint

A:  Hi Jennifer, Thank you for your question. Our Behr Enamel Urethane Alkyd is a stand-alone product and does not require a sealer. However, you can apply a water-based polyurethane over it for added protection. Have a great day! - Alex

A:  Hi Ronda - Thanks for your question. Our Urethane Alkyd Enamel Paint can be applied to the railings and spindles on a deck; however, please keep in mind that we do not recommend using this product on a deck floor since it's not designed for foot traffic. Have a great day! -Christina

A:  Hi Ronw, thank you for your question. HVLP sprayers are not recommended for application with our products. We recommend using an airless sprayer with a .013-.017 tip when using Urethane Alkyd Satin Enamel. Have a great day! -Alex

A:  Hi mkitson, thanks for the question. Our Urethane Alkyd Enamel can be tinted to many of the colors in our color palette and be custom-matched. Have a great day! -Ronald

A:  Hi Mike, thanks for your question. You can apply our Urethane Alkyd Enamel on pressure-treated wood as long as it has had at least 6-8 weeks to cure. Also, it is recommended to prime the wood first before painting. I'd recommend priming the wood with our Interior/Exterior Multi-Surface Stain-Blocking Primer & Sealer. Have a great day! -Ronald

A:  Hi Vanessa, thank you for your question. If the fiberglass is already painted, you can use this product. The surface should be sound, clean, and scuff sanded to promote adhesion if the previous finish is glossy. Have a great day! -Giovanna

A:  Hi Meri, thanks for the question, Our Urethane Alkyd Enamel is a good choice for painting a fiberglass entrance door. When painting fiberglass doors, I would recommend priming it first with our Bonding Primer to help with the adhesion of the paint. Have a great day! -Ronald

A:  Hi Gerry, thank you for your question. Our Urethane Alkyd Paint can be used on pegboards. The surface should be sound, clean, and dry before coating. Scuff sand glossy/smooth surfaces to promote adhesion. Also, priming is recommended. Good luck with your project! -Alex