Questions and Answers for BEHR PREMIUM 1 gal. #SC-102 Slate Gray Solid Color Waterproofing Exterior Wood Stain and Sealer

A:  Hi Karen, thanks for the question. One gallon of our Semi-Transparent Waterproofing Exterior Wood Stain will cover approximately 150 square feet with 2 coats of stain. Have a great day! -Ronald

A:  Hi Jimmy, thanks for the question. Our Semi-Transparent Waterproofing Stain & Sealer isn't formulated to resist pests, and we haven't tested it to see if it would do so. Have a great day! -Ronald

A:  Hi ColorChange, thanks for the question. We haven't made any changes recently to the Cedar Naturaltone Semi-Transparent stain. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly if you need further assistance; our customer care team is happy to help you! -Ronald

A:  Hi paula, thanks for your question. It sounds like you're asking how long the first coat of stain needs to dry before applying the second coat. We recommend letting the first coat dry for at least 1 hour before recoating; however, if you want to wait up to 24 hours before applying your second coat, you can certainly do that as well. Have a great day! -Christina

A:  Hi Reagan, thanks for your question. While our solid color stains have a similar appearance to paint, they also have a thinner consistency that allows you to see more of the wood grains than a paint would. Hope this helps! -Christina

A:  Hi Joyce, thanks for your question. To prepare your wood surface, we recommend sanding to remove any loose wood fibers (or peeling paint/stain), cleaning with our All In One Wood Cleaner, and allowing the surface to dry before applying our Premium Semi-Transparent Stain & Sealer. Have a great day! -Christina

A:  Hi Adam, thanks for the question. Our Solid-Color Waterproofing Stain & Sealer can be sprayed with an airless sprayer with a .015"-.019" sized tip. Have a great day! -Ronald

A:  Hi ChuckB265, thanks for the question. It's hard to say if the existing coating has completely worn off, but you can apply the Solid-Color Waterproofing Stain and Sealer over the transparent stain. I'd recommend removing any coating that is loose or peeling by scraping, sanding, or power washing and then cleaning the surface with our All-In-One Wood Cleaner before applying the new stain. Have a great day! -Ronald