Questions and Answers for BEHR PREMIUM 5 gal. #N520-3 Flannel Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

A:  Hi Tray, Thanks for the question. We recommend using a good-quality nylon or polyester brush to brush the paint. The size of the brush depends on the size of the area you're painting. Also, for larger areas, I'd recommend using a 3/8" nap roller. If you have additional questions about applying the product, feel free to contact us directly; our customer care team is happy to help. -Ronald

A:  Hi Michael, thanks for your questions. Yes, our 1-Part Epoxy can be used on your aggregate driveway. To see if etching is needed for your surface, I recommend performing a porosity test by sprinkling water in different areas across the surface to see how quickly it absorbs the water. If the water absorbs right away, etching is not needed. Have a great day! -Christina

A:  Hi henry, thank you for your question. Although the 1-Part Epoxy can be tinted to many colors, it is only available in a satin finish. Have a great day! -Giovanna

A:  Hi Rhonda, thank you for your question. As it turns out, we do not recommend our products for manufactured floors. I recommend reaching out to Home Depot for more information regarding an alternative product. Have a great day! -Lina

A:  Hi Robert, thank you for your question. As it turns out, we do not recommend our products for vinyl tile floors. The resistance of the vinyl flooring will prevent our products from adhering or drying properly. I suggest reaching out to Home Depot to see if they have a product recommendation that will suit your project best. Good luck with your project! -Alex

A:  Hi Leov, thank you for your question. Unfortunately, we do not recommend our 1-Part Epoxy Concrete and Garage Floor Paint on a fiberglass sink. Also, our products cannot be submerged underwater or be exposed to water constantly, as they will not hold up. I suggest checking with your local store for a recommendation on a specialty product for your project. Have a great day! -Giovanna

A:  Hi James - Thanks for your question. Yes, our Self-Priming 1-Part Epoxy can be applied to a bare concrete deck. Have a great day! -Christina

A:  Hi RSanchez, thanks for the question. Our Concrete & Garage 1-Part Epoxy isn't recommended to be used on asphalt. Have a great day! -Ronald

A:  Hi Mont, thank you for your question. As it turns out, we don't recommend our products, including the 1-Part Epoxy Concrete and Garage Floor Paint, to be applied to countertops, as they are not FDA-approved for food contact and water exposure, food stains, cleaning, hot pans, etc., will lead to reduced durability and an unsatisfactory surface. Have a great day! - Randy

A:  Hi Jason, thank you for your question. The 1-Part Epoxy Concrete and Garage Floor Paint is designed to resist hot-tire pick-up and provides superior abrasion resistance. Keep in mind this coating is not designed for commercial use, and annual maintenance may be needed. For best results, we recommend proper surface preparation, priming using the Concrete Bonding Primer No. 880, and applying two coats of 1-Part Epoxy at the recommended spread rate. Have a great day! - Randy