Questions and Answers for Bosch Bulldog SDS-Plus Chisels/Carbide Masonry Trade Rotary Hammer Bit Set (6-Piece)

A:  Thank you for your inquiry. If your Milwaukee hammer drill accepts SDS-plus bits, then this HCT006 SDS-plus bit set should work. For more details you can call us at 1-877-BOSCH99 (1-877-267-2499).

A:  This HCST006 is an SDS-Plus chisel bit that's designed to work with an SDS-plus rotary hammer. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  The HCST006 set comes with different types of bits. There are (1) 5/32" x 4" x 6", (1) 3/16" x 4" x 6", (1) 1/4" x 2" x 4", (1) 3/8" x 4" x 6", (1) flat chisel, (1) point chisel, Case. The SDS-plus rotary hammer bits are all 4 cutters. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  Hi there! The HCST006 SDS-plus Chisel is designed to work with an SDS-plus rotary hammer only. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  No it has to be an SDS tool otherwise it will not fit.

A:  Probably not. A hammer drill is not the same thing as a rotary hammer. I doubt your hammer drill will have the SDS-Plus chuck.

A:  This kit will work in any brand hammer drill that is sds-plus compatible. Mine happens to be a Milwaukee.

A:  If it has an SDS plus chuck.

A:  As long as it is SDS plus.

A:  If your Milwaukee hammer drill accepts SDS-plus bits, then this HCT006 SDS-plus bit set should work. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  No, a proper masonry bit should used. A flat chisel is for chipping not drilling.

A:  Flat chisel is used to chip cement or to remove excess materials. You need to use a hammer drill bit for your application. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  It won't be a nice round hole. It'll be jagged, etc. I'd drill a bunch of small holes around the circle or buy a 3/4" hole saw or masonry bit. You're going to hit the wire also you'd have to cut it with snips.

A:  I'm sure it could be done but I'm sure would crack the stucco. The chisels are for concrete or masonry breaking not drilling. But Bosch offers a 3/4 sds plus bit to purchase separately. Which would offer a cleaner round hole.

A:  The chisel is not for drilling, its for shaving and cutting material. You want to use the boring bits to drill your hole.

A:  Because it's so crumbly and held together with chicken wire, stucco doesn't like to be drilled. If I had to do it, I probably try masonry bits, starting with 1/8" or 1/4" pilot hole. I think these flat chisels would cause too much collateral damage.

A:  it would be a sloppy hole but yes

A:  I recall 5 or 6"

A:  The HCST006 SDS-plus bit set comes with 2 type of chisels that has a length of 5-3/4" each. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

A:  The chisel is 10 inches long.

A:  Chisels are 5.5" from tip to end of stem. Drilling bits are longer at 6.5".

A:  I ordered my online to Galveston

A:  You can order it online and have it shipped to your nearest Home Depot or to your house. Usually for free.