Questions and Answers for Cap A Tread Walton Oak/Silverton Falls Oak 47 in. L x 7.37 in. W x 0.56 in. T Vinyl Stair Reversible Riser

A:  Thank you for your interest in Zamma stair renewal system. They are 2 different thicknesses. The $60 will fit stairs up to 1" thick. The $66 will fit stairs up to 1.5" thick. Best of luck with your project.

A:  Clint, Thank you for your interest in Zamma Cap-A-Tread stair renewal system. You will need to purchase one additional CapKit, cut the bull nose off the front of the extra set and miter both edges of the cap-a-tread being installed on the step as well as the side bull nose pieces to a 45 degree angle. The extra riser would be used between the top step and the edge of the flooring. Best of luck with your stair renewal project.

A:  Kingston, Thank you for your interest in Zamma Cap-A-Treads. The cap-a-treads may be placed directly onto the existing plywood stairs. Best of luck with your stair renewal project.

A:  Thank you for your interest in Zamma Cap-A-Tread Kits. They are priced per kit. Each kit contains 1 cap-a-tread and 1 riser. They are packaged up to 2 per carton for shipment. You will need to order 13 capkits and 1 extra riser to go between the top step and the edge of the floor. Best of luck with your stair project.

A:  Thank you for your interest in Zamma Cap-A-Treads and Risers. The risers have an unfinished edge. See the installation link provided and view the video available at the bottom of the page. Best of luck with your stair project. https://www.capatread.com/installation

A:  Very good question. The Type 2 (Square Nose) are not available with a pre-mitered cut. The bull nose on the cap-a-tread will need to be mitered, to a 45-degree angle during installation. Best of luck with your stair project. https://www.capatread.com/installation

A:  Thank you for your recent purchase of Zamma Cap-A-Treads. We have improved our shipping boxes to prevent damage during shipment. Best of luck with your project.

A:  Thank you for your question. When looking up the stairs from the bottom, if they are open on the left, you will need to order model# 016273783; if opened on the right side, you will need to order 016173783. One side of the cap-a-tread will be pre-mitered. The side bull nose piece will need to be cut and mitered during installation. Best of luck with your project.