Q:Sir: We applied a two-part epoxy paint on our pool and waited too long to apply the second coat. The paint mfg. said we have to lightly sand the entire 1,650 sf. surface to break the surface glaze in order to have the next top coat properly adhere. Our problem it that the surface is highly irregular and being able to completely sand it is next to impossible. Can we use this product to compensate for the small areas we are missing with the sanding and then apply the final epoxy top coat?
by|Nov 7, 2017
1 Answer
Answer This Question
A: Unfortunately the MBP- Multi-Surface Bonding Primer is not suitable to be used for bonding epoxy coatings in a pool. For further assistance please contact our installation division at 800.272.8786 option 2
by|May 5, 2023
Q:I ripped the carpet out and found this under which does not come off by simply scrapping.
by|Feb 25, 2017
1 Answer
Answer This Question
A: Adhesive layers must be removed. Use extreme caution; adhesives
may contain asbestos fibers. Do not sand or grind adhesive residue, as
harmful dust may result. Never use adhesive removers or solvents, as
they soften the adhesive and may cause it to penetrate into the
concrete. Adhesive residue must be wet-scraped to the finished
surface of the concrete, leaving only the transparent staining from the
glue. To determine desirable results, do a test bond area before
starting. Refer to the RFCI Pamphlet "Recommended Work Practices
for Removal of Resilient Floor Coverings" for further information. For further assistance please contact our installation division at 800.272.8786 option 2
by|May 4, 2023
Q:Specifically, we are looking for a product that allows us to lay glazed ceramic or porcelain tile over pre-existing glazed ceramic tile. Does MBP make that possible, reducing the chances of popped tiles due to poor adhesion?
by|Aug 1, 2016
1 Answer
Answer This Question
A: MBP - Multi-Surface Bonding Primer can be used to prepare pre-existing glazed ceramic tile prior to setting glazed ceramic or porcelain tile. For further assistance please contact our installation division at 800.272.8786 option 2