Questions and Answers for Delta Classic Single Hole Single-Handle Bathroom Faucet in Chrome

A:  Hi Craig, thank you for contacting Delta Faucet Company! If a faucet is leaking it's usually due to wear and tear and the internal seals will need to be replaced. Please reach out to us directly so we can further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi JohnS! Thank you for your question and we are happy to help. The Delta 583LF-WF does have an aerator that can be removed by unscrewing it. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

A:  Hi Kohler, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Yes, our Delta Faucet model 583LF-WF Classic Single Hole Single-Handle Bathroom Faucet in Chrome includes the RP38996 drain assembly. Please see the following parts diagram link for more information. https://images.thdstatic.com/catalog/pdfImages/9a/9a47bf7d-15e1-4b35-a79f-7118b8292115.pdf Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  You can solve this issue by putting a small mixing valve under the sink.

A:  Hi Kristen! Thank you for contacting us at Delta Faucet! I will be happy to help. The only way would be to close the hot shut off valve under the sink. This will lower the amount of hot water allowed into the mix. Best Regards, Tim

A:  Thank you for your question, Loriborealis! The Flex Supplies included with this model are not removable and doing so will damage the product and void the warranty. Extension hoses designed for use with 3/8” Compression Fittings could be used however. Best regards, Edward

A:  yes

A:  Hi, Spaghetti! Thank you for your question. The Delta Classic 583LF-WF Lavatory faucet body is cast brass. Best Regards, Rosanna

A:  I just measured the one I installed a few months ago. Without the base plate (aka escutcheon) the faucet base is a 1.7" x 2" oval. Too small for your purpose. However, it may work if you have enough room to install the faucet with the oval base plate, which is included and measures 2.6" x6". Detailed measurements can be found on the specification sheet pdf that is listed under the product description.

A:  Thank you for your question, Joan92019. In a single hole installation, the base is 1 7/8" wide. The 3-hole base plate is 2 9/16" x 6 1/8". Here is a link to the Technical Specifications for more information: https://images.homedepot-static.com/catalog/pdfImages/26/261a163a-7619-4c1b-b2db-fb8a80597904.pdf Best regards, Jon Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

A:  Yes, they hook under the vanity

A:  No. Your installation might require different lengths than supplied (and perhaps a different length for hot than cold). You’d be wise to buy the upgraded stainless steel braid-covered lines anyway. Much less likely to burst when you’re away on vacation (remember, that leak continues until you manually shut off the valve!).

A:  No it does not.

A:  I purchased this awhile ago, but yes, I believe it did come with supply lines. Depending on what you have going on under the sink, however, you may need to buy an extension to reach the connecting water terminals. If I recall correctly, I had to do this and the distance from the sink to the on/off valves was longer than the supplied lines.

A:  Yes, they connect under the vanity

A:  Hi, BH! Thank you for your question. The Delta 583LF-WF does include 14" (356 mm) flexible supplies with 3/8" compression fittings. Best Regards, Rosanna

A:  Yes, supply lines are included with the faucet.