Q:Can the hardware be changed out to antique bronze or brass?
by|Oct 10, 2023
0 Answer
Answer This Question
Q:My mirror is always tilting downwards and we don?t know what to do to stop it! Every time I go in the bathroom I have to adjust it but it falls right back down. Please help
by|Dec 20, 2022
1 Answer
Answer This Question
A: I have the same problem
by|May 27, 2023
Q:My mirror did not come with some of the mounting hardware. How do I contact Delta to send me the missing hardware?
by|May 10, 2022
1 Answer
Answer This Question
A: Hi. Did you get your hardware? Mine didn?t come with hardware either.
by|Sep 10, 2022
Q:Excuse me, where can I get the hardware for the mirror? Or how else could I install it?
by|Jan 26, 2022
2 Answers
Answer This Question
A: Everything for a normal installation is included in the box. Something special may require a glass shop for installation.
by|Jan 27, 2022
A: My mirror came with all needed hardware. If yours didn't check for a list of items in the package, my guess is you were shorted the hardware. Either return it or call delta.
by|Jan 26, 2022
Q:There is an outlet above our sink, where we would mount a mirror. It is off to the side a bit, but not far enough to the side that a mirror would fit. If we mounted this mirror, essentially covering the outlet, would we still have enough room to access the outlet?
by|Mar 25, 2021
4 Answers
Answer This Question
A: Mary, Thank you for your question on the Delta Silverton 26 in. H x 22 in. W Single Wall Mirror in Chrome. The projection of the mirror is 3.5" off the wall that may allow enough space for you to access the outlet. Best, Customer Care Team
by|Mar 25, 2021
A: Yes you would. I just tested our mirror and there is enough room that plug will not interfere with the mirror. The mirror allows some movement which would help with outlet being behind it. Hope this helps!
by|Mar 29, 2021
1 found this answer helpful
A: Yes there about a 3 in space between mirror and wall
by|Mar 29, 2021
1 found this answer helpful
A: yes, you would, but i would put mirror higher then nonmoral because the mirror tilt giving you more viewing
by|Mar 29, 2021
1 found this answer helpful
Q:How far out from the wall does the mirror stick out?
by|Apr 5, 2019
2 Answers
Answer This Question
A: 3 3/4 "
by|Apr 6, 2019
A: Eddy, Thank you for your question. This mirror will extend approximately 3-1/2" from the wall. Best, Customer Care Team
by|Apr 5, 2019
Q:How wide is the mirror with the mounting hardware included in width?
by|Mar 17, 2019
1 Answer
Answer This Question
A: BobsMarie, Thank you for your question. This mirror is 24 inches in width including the mounting hardware. Best, Customer Care Team
by|Mar 19, 2019
Q:I purchased this mirror 4 months and it was fine. Yesterday it was tilted down and will not stay in the proper position. It’s only my wife and myself and we do not move it for any reason. Could it be the bushings be the issue (There no other reason that this would happen). Please advise. Thank you.
by|Sep 14, 2018
5 Answers
Answer This Question
A: the rubber grommets on the side holder where out, either take the mirror down and adjust the bracket, or next time you get a package put a block of Styrofoam behind it, use double sided tape
by|May 6, 2023
A: Yes the little black rings become worn and my mirror did the same. My son put in little rubber rings and it is fine now
by|May 6, 2023
A: Just do this. Call this number and problem solved.They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800.542.3789 or by email at customersolutions@libertyhardware.com. Thanks you for the support.
by|Dec 28, 2018
A: I got mine in Nov 2018.....same problem.
by|Dec 27, 2018
A: Mike, Thank you for your question. To best assist you please contact our Customer Care Specialists as they are available to address and questions or concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800.542.3789 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team