Questions and Answers for Delta Victorian 8 in. Widespread 2-Handle Bathroom Faucet with Metal Drain Assembly in Chrome

A:  Hi Troy, Thanks so much for contacting Delta Faucet Company about 3555-RBMPU-DST! The spout body is not an orderable part, I am sorry for any inconvenience this may have caused. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

A:  Hi LesD, Thank you for your question regarding our Delta Faucet 3555-RBMPU-DST. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hi Paula, thank you for contacting Delta Faucet Company! The drain assembly is RP26533 and can be purchased online or locally. Please refer to the Parts Diagram in the link below. https://images.thdstatic.com/catalog/pdfImages/21/211e540d-0b63-4925-96e8-271cd1c1930c.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi Chris, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! The handle is attached with a set screw on the side of the handle. I recommend loosening the screw, lining up the handle, the retightening with a 3/32" hex wrench. If there is a leak from the handle, with the handle removed, use a socket to ensure the bonnet nut is tight. If the leak remains, the RP60400 valve assembly should be replaced. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! This faucet does not use seats and springs. This unit uses the RP60400 cartridge assemblies. Please reach out directly with further questions. Best Regards, Kayla

A:  Hi Cind, Thank you for your question about the Delta Faucet model 3555-MPU-DST. The handle and spout bases have a diameter of 1 - 15/16". Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hi Carol, Thanks so much for contacting Delta Faucet Company! I have included a link below to the push pop that would match the 3555-RBMPU-DST, however I also included some troubleshooting steps that we would recommend trying first. First, check to be sure the strap assembly that operates the stopper is properly adjusted and the nut holding the horizontal rod in the drain assembly is tight (snug against the tailpiece). Be sure the stopper is properly adjusted so when the lift knob is pulled up, the stopper is allowed to drop. The stopper is pulled down when installed in the vandal resistant bail position. If any section hits underneath the counter or sink, the stopper cannot drop far enough to seal. If everything is adjusted properly, then check the amount of sealant (plumber's putty or silicone) between the flange and the lavatory bowl itself. Code permits that stoppers can leak no more than a gallon per hour with 6" of water in the bowl. [ASME A112.18.1-2000 6.7.2] With Overflow https://www.deltafaucet.com/parts/product/RP101631RB.html Without Overflow https://www.deltafaucet.com/parts/product/RP101632RB.html Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist