Questions and Answers for Ekena Millwork 39 in.W x 23 3/8 in.H x 3/8 in.T Large Cameron Decorative Fretwork Wall Panels in Architectural Grade PVC

A:  Thank you for your interest in our product. We do recommend painting these panels to ensure as long a life as possible. They can be painted prior or after installation, they may need to be touched up after install is complete. Good luck on your project!

A:  Thank you for your interest in this product! I am assuming that your wall dimensions represent feet, which would make the square footage of this area 150 sq. ft. You did not specify the height of the door, so I can't say for certain what your square footage is not including the door. You will need to calculate the square footage of the door and reduce the overall square footage by that number. Once you know what your total square footage is, you must decide what size panel you want. One size covers 2.37 sq. ft. per panel and the other covers 5.49 sq. ft. To calculate how many panels you would need, divide the overall square footage by the square footage of the panel you select, then round up to the nearest whole number. This is the absolute minimum number of panels, however, you should order 10% to 20% extra to account for material that is lost when trimming and any mistakes that are made. Best of luck on your project!

A:  Thank you for your interest in this product! The price of these panels will depend on the size you select. To view the price, simply choose one size or the other. These two shapes are sold together, so the price that displays reflects the one square and one cross. To get four squares and six crosses you would need to purchase a quantity of six. Be advised, you would have two squares left over. Best of luck on your project!

A:  Thank you for your interest in our products! These PVC fretwork panels are made from a durable material that can be installed both indoors and outdoors and in either hot or cold climates. We recommend installing the panels with both a construction adhesive, as well as, finishing nails. All that said, we would not recommend installing the panels on top of heating elements such as fireplaces, fire pits, or grills as these sorts of products will reach higher than natural temperatures. For more information regarding installation and the warranty for these panels, please refer to the 'Info & Guides' section of this product page. Best of luck on your project!

A:  Thank you for your interest in our products! We do not offer samples for our Fretwork Wall Panels, however, they are relatively cost effective, so you could order just a single panel and treat that as your sample. If you are just wanting to get a feel for the material and don't necessarily care what size it is, you might consider ordering the smallest size we offer to keep the cost of this "sample" lower. Best of luck on your project!

A:  Thank you for your interest in our products. Yes, these can be applied to walls with texture. Simply apply a polyurethane construction adhesive to the backs of the panels and fasten them with finishing nails. For an orange peel, there will be little to no gaps between the panel and the wall. Of course, the more the texture varies the more gaps you could see between the back of the panel and the wall. But if there are areas with greater gaps, they could be filled in using a silicone caulking. Best of luck on your project!