Questions and Answers for FLIPTOGGLE 3/16 in. x 24 in. x 2-1/2 in. Anchor Plus Bolts (25-Piece)

A:  Thanks for your question. It's per bolt.

A:  It’s per bolt. This is a fantastic product. I’ve used it to hang bicycle hooks in the garage and also for TV mounts when a beam isn’t available.

A:  Hi Cece, the first step would be to remove the metal screw, then you can use scissors to carefully remove the remaining plastic part. The metal piece that is behind the wall will either stay there or fall behind the wall. Thank you!

A:  No, in a wall between two studs will work but to go straight into a stud no.

A:  Hi, Maximum object thikness should be 1.48 in. on top of 1/2in. drywall. Check the specification sheet for more details on the fliptoggles: https://cobraanchors.com/media/amasty/amfile/attach/tQvIu7fQmXZG66Z5MQ2RphZgJALw5lXS.pdf Thank you

A:  So you'll drill a hole where you want your anchors to be, then you'll put the flip toggle in the hole and push a piece the screw mount into the hole using the zip tie. Once that's in place, you'll drill in the screw to secure the anchor. It's super easy to use. And super secure and heavy duty use.

A:  This video should give you a visual guide to understanding toggle bolts. https://youtu.be/SC1ZuxuZ2PU

A:  Hi ChrisL The exact threading screw is 14-20 Thank you

A:  137lbs is the safe working load in shear of a 1/4’’ size Flip Toggle anchor installed in a 1/2’’ drywall. Consult the technical specifications through the link below for more detaile; https://cobraanchors.com/media/amasty/amfile/attach/tQvIu7fQmXZG66Z5MQ2RphZgJALw5lXS.pdf Thank you,

A:  I would say using it for a toilet paper holder would be overkill, but for the towel bar, if there is any possibility it could be used for more than towels, it might not be overkill.  Just make sure the screws will fit the towel bar as they may be a bit too big.

A:  Should be okay, but just make sure that the outer edges of the metal studs are not touching these plastic hangers, this could compromise the integrity of the hangers overtime I guess. The weight limit should be mentioned in the description of the product.

A:  The FLIPTOGGLE can be used in a metal stud as long as the clearance space is at least 2-1/2 inches. The loads to be considered are loads of application into drywall. Performance test has not been done for usage into metal studs. Best regards

A:  These aren't designed for metal studs, but if you happen to drill into one it shouldn't cause any issues.

A:  They are designed to be used in hollow walls not intended for use on studs they use a butterfly clip to secure your item great for light shelves or other small mountable appliances under 100lbs.

A:  Yes. Just assure you drill the hole in the center of the metal stud. I’ve used several times on metal stud walls to wall mount heavy objects.