Questions and Answers for Gutter Guard by Gutterglove 4 ft. L x 6 in. W Stainless Steel Micro-Mesh Gutter Guard (80 ft. Kit)

A:  Hi Chuck! The recommended installation is to slide the gutter guards under the last layer of shingle and on top of the underlayment.

A:  Hi Bert! We appreciate you reacahing out to and sorry if the screws are giving you a hard time. You can also pre-drill if the self-tapping screws do not work. Feel free to call us at 877-662-5644 if you want us to send you some more screws.

A:  Hi Jason! You can use the rainwater diverter together with our gutter guards,. It is recommended that you remove it first, then reinstall it once the gutter guards have been installed.

A:  Hi TomG, We appreciate you reaching out to us. The price varies per kit sizes. Those 39' kits (which contain 13 pieces of the 36" section) are only available in stores, while those 48" sections are available online. The 39' kit has the same features as the 48' kit, so you can buy it in store if you think you can save more. If you want to check if your nearest Home Depot store has it in stock, you can do so.

A:  Hi AlexHill0130, We Appreciate you reaching out to us. There is no difference in length between the 10 sections pack and the single section pack. In the 10 pack option, there are 10 pieces of 4' sections that can be purchased online, whereas the single section pack can be purchased by calling us at 1-877-662-5644.

A:  Hi Craig! Thank you for reaching out to us. Yes, each kit comes with self-tapping screws. Should you need more screws, please feel free to call us at 877-662-5644 and we'll send them out to you free of charge.

A:  Generally speaking the debris will be blown away by the wind and rain butt is important to understand that no gutter guard is 100% maintenance free, however, our gutter guards require the least amount of upkeep of any other gutter guard in the industry. A great way to clean off the gutter guard is with the use of The Gutter Guard Brush. It’s designed to clean off any gutter guard without having to get on a ladder or roof. You just screw this special brush on the end of any standard extension pole, then from the ground, just reach up and brush it off. For more information and where to buy, visit www.TheGutterGuardBrush.com.

A:  Hi ChemE75! The 5" version of the gutter guards measures 5.5" from one end to the other and it can fit gutters between 2.5" to 5" wide. If you would like to see a sample piece, we will be happy to send it to you. Please contact us at 877-662-5644 or email us your address at customerservice@gutterglove.com.