Questions and Answers for Impact Plus 48 in. x 84 in. Smooth Flush Solid Core Espresso MDF Interior Closet Sliding Door with Matching Trim

A:  Steve, They will be 30.5 wide by 93.5" height. I wouldn't cut the width since its a finished banded edge and not necessary since its a slider but you can cut the height and would be cheaper option than a custom door. Just make sure whomever does it is skilled and has the right tools. You will need to remove, cut, replace the hardware on the top edges. You will also need to cut down the track any good hacksaw or a metal blade on a power saw will do the job. Thank you

A:  2-3/4"

A:  Greetings! Thank you for your interest in the Impact Plus 72 in. x 80 in. Smooth Flush Solid Core White MDF Interior Closet Sliding Door with Matching Trim. Please see the Installation / Assembly listed in the Additional Resources for the 4-step easy install of the Sliding Door. This door has instructions for mirrored as well as non-mirror doors. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  EKim, It is made of MDF so defenitely will not perform well in a high-moisture area. Thank you.

A:  Brian, You sure can. Any good hacksaw or a metal blade on a power saw will do the job. You will also have a little extra overlap in the middle but most folks dont really care about that since the alternative is a more costly custom-sized unit. Thank you to your question.

A:  Please reach out to us at Sales@CustomDoorandMirror.com if you are interested in seeing if we can get you the custom size. Thank you.

A:  Cris, This would be a 4-panle unit in your size but the height will not work out of the box. Please reach out to us at Sales@CustomDoorandMirror.com if you are interested in seeing if we can get you the custom size.

A:  Mike Our doors name is the finished opening required so in this case it would be 96" x 96" Our panels are sized smaller to accomodate the hardware and tracks. Thank you.

A:  Vityaba, Although we dont recommend it, you can cut the height and would be cheaper option than a custom door. Just make sure whomever does it is skilled and has the right tools. You will need to remove the hardware, cut the door, and then replace the hardware. We recommend you do this on the top edge. Thank you