Q:I have this tub installed with tile walls and now need to order the glass doors. I want slider doors (pass thru) with both sides that open. I believe I used a Halo door on my corner shower. What (high end) doors are available for this tub?
by|Jan 7, 2023
2 Answers
Answer This Question
A: I went with Kohler Levity 59” by 62” semi-frameless sliding tub bypass doors
by|Jul 17, 2023
1 found this answer helpful
A: Hello, this is Sarah with Kohler Customer Service. I am glad to address your question. The following doors are recommended for use with this bath: K-702200-G73, K-702200-L, K-702200-6L, K-706000-D3, K-706000-L, K-706003-L, K-706004-D3, K-706004-L and K-706007-L. Thank you for choosing Kohler.
by|Jan 10, 2023
Q:Qu� medida tiene por dentro abajo cu�nto arriba
by|Sep 7, 2022
0 Answer
Answer This Question
Q:Is there a deep soak drain that works with this tub to get any more soaking depth to the limited 9"?
by|Aug 25, 2022
2 Answers
Answer This Question
A: Not that I know of.
by|Aug 26, 2022
A: Hi Cynthia, this is Sarah with Kohler Customer Service. I am glad to address your question. The soaking depth is dependent on the overflow height on the bath. Any drain would yield in the same water depth due to the hole in the bath tub. Please call our team at 1-800-4KOHLER (M-F; 8am-5pm CST) for additional assistance. Thank you for choosing Kohler.
by|Dec 16, 2022
1 found this answer helpful
Q:Please see attached,
Can someone confirm the distance from the tub edge to centerline of the rough-in drain pipe is 3",
and from centerline of the rough-in drain pipe to the centerline of drain hole is 5.5"?
by|Jun 18, 2022
1 Answer
Answer This Question
A: Hi Jason, this is Sarah with Kohler Customer Service. I am glad to address your question. The dimension from the edge of the bath to the center line of the overflow pipe is 3". The dimension from the centerline of the overflow pipe to the centerline of the drain hole is 5-1/2" on center. These dimensions can be seen on page two of the specification sheet. Thank you for choosing Kohler.
by|Jun 20, 2022
Q:My tub has huge orange peel. I would call it cottage cheese. Way more than what i have ever seen. Is this the new normal or is this a quality issue ?
by|Jun 16, 2022
3 Answers
Answer This Question
A: I went through 3 of these tubs and all of them had the orange peel look, I actually don’t mind it as it blends with the rustic look we were seeking. However inspect carefully for cracks. Use your phone camera and look at inside corners for micro cracks. Every tub ordered was cracked in glass coating.
by|May 13, 2023
1 found this answer helpful
A: Definitely not normal, should be nice and smooth
by|Jun 22, 2022
A: Hi DJeter, this is Sarah with Kohler Customer Service. I am glad to address your question. Due to the nature of enameled cast iron, there is a measure of rippling or waviness to vertical walls as gravity pulls the enamel down during melting in the furnace. Horizontal surfaces melt smooth. Please call our Customer Care Center at 1-800-4Kohler (1-800-456-4537) if you have additional questions. Thank you for choosing Kohler.
by|Jun 17, 2022
Q:What Trip Lever with Pipe Bath Waste are people using with this tub? Having a problem with the pipes all coming straight where the anchor is getting stuck somewhere in the pipe and the lever has trouble going up to keep the water in the tub.
by|May 13, 2022
2 Answers
Answer This Question
A: I used the kohler toe tap bath drain-which pops up and down with no internal linkages kohler model# K-7259-BN home depot store sku# 1000948919 in brushed nickel
by|Jul 16, 2022
1 found this answer helpful
A: Marc, my name is Jessica with Kohler Customer Service. I am happy to assist with your inquiry. K-875 requires one of the following bath drains: K-37380, K-37383 or K-7259. The following link is to the specification sheet showing this as well: https://bit.ly/3l6L0Ao. Thank you for choosing Kohler.
by|May 13, 2022
Q:Looking at the spec sheets, The larger 60x32 version of the Bellwether is 298 lbs. The 60x30 version of the same tub says 325 lbs. Why would the smaller version of the Bellwether be 27 lbs. heavier than the larger version?
by|Feb 21, 2022
1 Answer
Answer This Question
A: Hi James, this is Lisa with Kohler Co. I am glad to answer your question. The weight of a tub is not always dependent on the overall size. The internal basin shape and size can determine how much material is used. If a tub is larger in size, it does not mean that there is more material that is used. Thank you for choosing Kohler.
by|Oct 3, 2022
1 found this answer helpful
Q:What is the threshold width of this bathtub (Bellwether K-837)? I'm trying to see which shower doors can be installed on it. Thank you!
by|Jan 17, 2022
2 Answers
Answer This Question
A: Hi Lucy, this is Sarah with Kohler Customer Service. I am glad to address your question. The minimum flat for the door measures 2-5/8". We recommend pairing one of the following showerdoors with this bathtub: K-702200-G73, K-702200-L, K-706000-D3, K-706000-L, K-706003-L, K-706004-D3, K-706004-L, K-706007-L or K-702200-6L. Thank you for choosing Kohler.
by|Jan 23, 2022
A: 4 inches
by|Jan 18, 2022
Q:Some of the reviews mention the surface being bumpy/wavy. Is that truly how the surface is or were those defective? I'm looking for a smooth surface tub.
by|Jan 3, 2022
6 Answers
Answer This Question
A: The surface if very subtly wavy but not at all rough or distracting and it doesn’t detract from the overall function or quality for the price.
by|Dec 23, 2022
1 found this answer helpful
A: Ours is totally smooth! We really love it - installed about a year ago and haven’t had any issues.
by|Jan 16, 2022
1 found this answer helpful
A: What you are referring to is slip-resistant surface on bath floor
by|Mar 28, 2023
A: Hi Abby,
I found the quality/surface of our tub to be absolutely fine. It's far superior to synthetic tubs.
by|Jan 16, 2022
1 found this answer helpful
A: The tub is beautiful. There are no bumps or waves in my tub. I would highly recommend it. Please be advised it is very heavy, but that is expected from a cast iron tub.
by|Jan 21, 2022
2 found this answer helpful
A: I ordered one and inspected it at the store before I had it delivered to my house. Unfortunately, it was quite bumpy on the apron, which is not what I wanted on display in my bathroom, so we returned it. I'm not sure what happened to Kohler, they used to produce pristine enamel tubs. We have one from the 60's that's still in great shape. :(
by|Oct 20, 2023
1 found this answer helpful
Q:Is there any difference between this, Bellwether, and Mendota tubs except for their inner shape?
by|Dec 8, 2021
1 Answer
Answer This Question
A: Hi Lena, this is Sarah with Kohler Customer Service. I am glad to address your question. The quality and material are the same. The internal shape and dimensions are different. You can see specifics for each bath on page two of the specification sheets. Please call us at 1-800-4KOHLER (M-F; 8am-5pm CST). Thank you for choosing Kohler.