Questions and Answers for Lanco Aqua-Proof 1 Gal. Waterproofing Roof Primer

A:  Hi Randy, the Lanco Aqua-Proof will work, but for your type of application we would suggest to use the Lanco Aqua-Proof Prep with it's multi use nature makes it ideally suited for a wide variety of applications where a waterproofing solution is needed, such as: to repair cracks and leaks, seal joints and flashings, waterproof under tile and stone and as a waterproofing shower pan liner. You can al so use the Lanco Siliconizer Sealer, which is used for sealing leaks and cracks of all types on any smooth surface. Use around penetrations, flashing and broken tiles. Excellent for repairing expansion joints, containing wall joints, sealing plumbing and electrical intakes.

A:  Hi Home Depot Customer, yes you can use the Lanco Aqua-Proof Primer to prime a drip edge for an SBS peel and stick roof material.

A:  Hi Rich, yes you can use the Aqua-Proof Prep to prime metal drip edge for an sbs peel and stick roof material, but to let you know that this product is not a metal primer. It is important to top coat the Aqua-Proof Prep, otherwise it will crack.

A:  Hi Aaron, have not come across this question often, but what I can say is that Lanco Aqua Proof will adhere to wood and will create a wood proof barrier. With that being said this product is not UV resistant and un sure if the product would affect your fish.

A:  Hi Dik629, here are the suggested directions AIR PUMP METHOD :The recommended equipment is an airless pump with pressure of 1,500 to 2,000 psi. A fluid delivery of 1 to 2 gallons per minute with a spray tip of 0.026 to 0.035 will be adequate. Wait 24 hours between coats. The hoses should be at least 3/8" inside diameter and of the high-pressure rate type. If the hose length is more than fifty feet, a larger inside diameter will be required. Only use a gas powered sprayer. The electric sprayer can burn down. We recommend GRACO and I see that you have one.

A:  Hi Armando, the coverage on a flat roof is 80 square feet per gallon, so for 800 square feet you will need 10 gallons.

A:  Hi Brett, definitely the concrete has to be completely dry before you apply the Lanco Aqua-Proof Primer. Remember you have to top coat the Lanco Aqua-Proof primer cannot be exposed.

A:  Hi Leigh, sorry but the Lanco Aqua-Proof will not work on the driveway by sealing the tar so it doesn't lift through.

A:  Hi BigGuy, yes you can and should paint over the Lanco Aqua-Proof. This product has to be covered with any top coat, from paint to tiles etc. It cannot be exposed to the sun's ray as it will crack.

A:  Hi Stan, yes you can use the Lanco Aqua-Proof Primer inside the shower and top coat with paint. Now the type of paint that you will use, it has to withstand constant water contact.

A:  Hi Suzq, yes you can use the Lanco Aqua-Proof in a pool before covering with Diamond Brite.