A: Hi SBBB, the Aqua-Proof Primer does not have an ASTM D41 certification as an asphalt primer.
by|Apr 26, 2024
Q:Could this be used to waterproof a plywood rooftop patio prior to installing rubber pavers?
by|Apr 24, 2024
1 Answer
Answer This Question
A: Hi Kristin, yes you can use the Aqua-Proof Primer to waterproof the plywood rooftop before installing rubber pavers.
by|Apr 26, 2024
Q:Can I use a modified thinset over the top of this? Will the modified thinset adhere to aqua-proof?
by|Mar 26, 2024
1 Answer
Answer This Question
A: Hi Bigbanana, yes you can use a modified thinset over the Aqua-Proof Primer, but make sure it is completely dry, I suggest to wait 24 hours.
by|Mar 26, 2024
Q:Can this be placed over shingles?
by|Mar 10, 2024
1 Answer
Answer This Question
A: Hi Justme, we don't recommend to use the Lanco Aqua-Proof Primer over shingles, this product is like a liquid rubber. You have to remember that you will loose any warranty that you have on the shingles. With shingles you should have a well ventilated attic if not you can have problems on your roof in the future. With this product your shingles will not be able to breathe and with heat condensation may form. This can cause problems in the future.
by|Apr 22, 2024
1 found this answer helpful
Q:Will it stop leaks around nails in v crimp tin?
by|Mar 4, 2024
1 Answer
Answer This Question
A: Hi Randy, the Lanco Aqua-Proof will work, but for your type of application we would suggest to use the Lanco Aqua-Proof Prep with it's
multi use nature makes it ideally suited for a wide variety of applications where a waterproofing solution is needed, such as: to repair cracks and leaks, seal joints and flashings, waterproof under tile and stone and as a waterproofing shower pan liner. You can al so use the Lanco Siliconizer Sealer, which is used for sealing leaks and cracks of all types on any smooth surface. Use around penetrations, flashing and broken tiles. Excellent for repairing expansion joints, containing wall joints, sealing plumbing and electrical intakes.
by|Mar 5, 2024
Q:Can you use to prime metal drip edge for an sbs peel and stick roof material?
by|Feb 20, 2024
2 Answers
Answer This Question
A: Hi Home Depot Customer, yes you can use the Lanco Aqua-Proof Primer to prime a drip edge for an SBS peel and stick roof material.
by|Feb 23, 2024
A: Hi Rich, yes you can use the Aqua-Proof Prep to prime metal drip edge for an sbs peel and stick roof material, but to let you know that this product is not a metal primer. It is important to top coat the Aqua-Proof Prep, otherwise it will crack.
by|Mar 20, 2024
Q:Can this be used as a moisture barrier on a wooden lid for a saltwater fish tank
by|Feb 10, 2024
1 Answer
Answer This Question
A: Hi Aaron, have not come across this question often, but what I can say is that Lanco Aqua Proof will adhere to wood and will create a wood proof barrier. With that being said this product is not UV resistant and un sure if the product would affect your fish.
by|Mar 11, 2024
Q:Can I use my Graco X7 to spray this on my roof and if so what size tip will I need. right now I have a 515 and a 619 tip will I need anything bigger than that to spray it.
by|Feb 7, 2024
1 Answer
Answer This Question
A: Hi Dik629, here are the suggested directions AIR PUMP METHOD :The recommended equipment is an airless pump with pressure of 1,500 to 2,000 psi. A fluid delivery of 1 to 2 gallons per minute with a spray tip of 0.026 to 0.035 will be adequate. Wait 24 hours between coats. The hoses should be at least 3/8" inside diameter and of the high-pressure rate type. If the hose length is more than fifty feet, a larger inside diameter will be required. Only use a gas powered sprayer. The electric sprayer can burn down. We recommend GRACO and I see that you have one.