Questions and Answers for MUSTEE 18 in. x 24 in. Plastic Utilatub Single Laundry Tub in White

A:  I'm sure you can do this, but you will have the two holes on either side still open. It has a standard hole size -- just check it against the size of the faucet you are installing.

A:  Yes, as long as your faucet fits in one or both of the pre-drilled holes. I am not using either hole because I already have a faucet from the wall.

A:  Each leg has an adjustable plastic footing with 1 inch play, but that part will be lost if you cut out 2 inches off the bottom to change the height from 34" to 32". You need a powerful saw to cut the metal legs.

A:  No adustable legs, I do not believe that they can be cut and still fit. Just look at a few tubs on display in the stores -- they are all put together pretty much the same.

A:  Not meant for wall-mount. But if you must, you need a 4 inch spacer to hang at the back, or 2 inch at the side.

A:  I would check with mfgr. -- some of the sinks are made for wall mount.

A:  No

A:  14" and 17"

A:  The interior of the tub measures 15" x 19"

A:  back

A:  The drain is at the back. The bowl slopes to the back and drains very well.

A:  How much does it weigh

A:  Back, like the majority of sinks -- so it is below the faucet.

A:  The drain is 3" from the interior back wall (faucet side) of the tub.

A:  In the back of the tub, so when the sink it is above it -- like the majority of sinks.