Q:Can I use a reducer pipe to 6" for a 6" flue and can you use a 6" reclaimer unit and use a 8" expanding pipe on a 8" flue? both 6" and 8" reclaimers have the same dimensions
by|Dec 23, 2020
3 Answers
Answer This Question
A: Again I would check with the magic heat website to know for sure.
by|Mar 6, 2021
A: I would check the magic heat website first. There is a reason they make the heat reclaimer for a certain size. And I think it won't be as efficient if you reduce the size of the stove pipe.
by|Mar 6, 2021
A: The Magic Heat must not change the size of the flue pipe that is required for the heating device. If your furnace requires a 8" flue then you must use the 8" Magic Heat. The same applies to the 6". If the heating device requires a 6" flue then you must use a 6" Magic Heat. If you have additional questions please feel free to call Customer Service at 1-800-325-7076. A technician will be happy to help you. Merry Christmas!
by|Dec 23, 2020
Q:That would be the only place it fits!
by|Dec 12, 2019
3 Answers
Answer This Question
A: No they don't recommend it. Check their website.
by|Mar 6, 2021
A: We prohibit horizontal installations for the Magic Heat on wood, coal or oil stoves due to creosote and soot build up. When mounted in a horizontal position and the soot scraper is used, there is no place for the loose material to drop out, so it stays in the Magic Heat and builds up to a point of plugging the unit. When this happens it could cause a serious fire in the Magic Heat, flue pipe, chimney or smoke up the house.
by|Dec 13, 2019
A: Check the magic heat website to know for sure. But they don't recommend it to be installed horizontally. You can burn it up that way.
by|Mar 6, 2021
Q:Can this be used with a vented natural gas fireplace
by|Mar 4, 2019
1 Answer
Answer This Question
A: No you can not use a Magic Heat with a vented natural gas fireplace.
by|Mar 6, 2019
1 found this answer helpful
Q:Am I correct in thinking this unit is good for wood burners also?
by|Apr 10, 2016
2 Answers
Answer This Question
A: Yes. Wood, coal, gas and oil. When ordering the unit, order for a specific application that suits you.
by|Mar 6, 2021
A: I would not have a wood burning stove without one. It doubles the heat and cuts the wood you burn by 1/3 - 1/2. It keeps the house temperature more even.
by|Jan 9, 2019
Q:Picture misleading. Is top crimped and bottom smooth. That is what I am needing.
by|Nov 11, 2015
3 Answers
Answer This Question
A: You can order it in the configuration that you need per what fuel source you are using.
by|Mar 6, 2021
A: The top is crimped
by|Jan 9, 2019
A: If you will purchase a crimping tool you can crimp both ends of the heat recovery unit and then your heat recovery unit will slide into the existing glue pipe. Secure with 1/4” hex head sheet metal screws.