Questions and Answers for Makita 116 MPH 91 CFM 18V LXT Lithium-Ion Cordless Floor Blower (Tool-Only)

A:  Thank you for your question. The XVJ04Z is the most compact and lightweight D-Handle Jig Saw in the Makita LXT class; weighs only 3.8 lbs. and the motor is designed to deliver 0 - 3,000 Strokes Per Minute. For more information, please refer to the following website www.makitatools.com/products/details/XVJ04Z.

A:  Thank you for your question on the XMT03Z jig saw. This tool needs the following wingnut. (265785-7) M5X10.

A:  Except for minor difference in weight and height The XVJ02Z is brushless and variable speed with control knob near the battery for speed of 800 - 3,500 SPM. The XVJ03Z is Brushed and has a speed of 0 - 2,600 SPM

A:  Thank you for your question. XVJ02Z is a brushless tool. There are many other differences. Please visit makitatools.com to compare.

A:  Yes

A:  The trigger is not variable speed. It is a switch on or off. The variable speed comes from the dial on the back or from the soft start feature.

A:  Thank you for your question on the XVJ02Z 18V LXT Lithium‑Ion Brushless Cordless Jig Saw has a large 2-finger variable speed trigger for added convenience with lock-on button.

A:  Thank you for your question on the XVJ02Z 18V LXT Lithium‑Ion Brushless Cordless Jig Saw.No, the soft start system can not be turned off. I recommend using the XVJ03Z it does not have the soft start set up.

A:  They should be compatible. I use the same batteries that came with my cordless drills on my blower.

A:  Thank you for your question, but we will require more specific information about the batteeis you have in order to provide an answer. Call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Buford, GA and are ready to help.

A:  Thank you for your question. No-load speed reduction feature of the XVJ02Z 18V LXT® Lithium-Ion Brushless Cordless Jig Saw, Tool Only cannot be disengaged. Makita USA does not recommend making any kind of alteration to our products. Alterations will void the Manufacturer Warranty and may compromise the integrity of the tools performance.

A:  I asked this question for a third time, hopefully someone who knows definitively can answer it. Dab, a lot of people don't like this feature since some materials require the blade to be moving at full speed BEFORE it contacts the workpiece.

A:  I am not sure but the soft start gives you more control when starting a cut. I have been using mine for several months now and it has been very good.

A:  Thank you for your question. Model 193516-3 Rip Fence/Circular Guide is compatible.