Questions and Answers for MetalTech 8-inch Heavy-Duty Caster Wheel with Double-Lock Locking Pedal for Metaltech Scaffolding, 4-Pack

A:  These are 1 3/8 " od posts. Should fit all commercial scaffolding supports

A:  The stem is 4" long and 1.25" in diameter. The center of the lock pin hole is 2.5" above the stem base.

A:  yes

A:  yes they do fit in 1.69'' tubing frame and 1.625'' tubing frames

A:  These are 1 3/8 " od posts. Try HFT or at Northern tool where I got ones for my metal tech bakers scaffold.

A:  It will not fit it is too big

A:  Yes if not take them to nearest home depot for full refund

A:  1-3/8" shaft

A:  the size of the shaft is 1.3/8''

A:  These are 1 3/8 " od posts.

A:  21/4"

A:  6 inches

A:  2 1/4"

A:  2 1/2 inches

A:  2 1/4"

A:  ’The diameter of the wheel is 1.38’’

A:  1 3/8"

A:  1 3/8 "

A:  These are 1 3/8 " od posts.

A:  These casters are compatible with all 1.69 in. and 1.625 in. O.D. scaffold exterior frames.

A:  no

A:  NO, they do not come with a pin or pins. Do NOT install the wheels without pins.

A:  No, i just bought 4 - 3/8 x 2 1/2' bolts with nuts.

A:  Please update if the wheels come with the locking span pins or not.

A:  Unfortunately they don't come with a locking pin.

A:  Yes, the wheels come with a pin to lock and secure the wheels to the scaffold.

A:  Our caster diameter is 1.38’’ we don’t have 1.1/4’’

A:  The stem is 4" long and 1.25" in diameter. The center of the lock pin hole is 2.5" above the stem base.

A:  These are 1 3/8 " od posts. Try HFT or at Northern tool where I got ones for my metal tech bakers scaffold.

A:  They are made with high density rubber and it might mark the floor However we have the M-MBC8HD 8’’ heavy duty caster it does not mark the floor (red rubber)

A:  hard rubber

A:  Looks like rubber to me.

A:  WILL THE PLASTIC HOLD UP ON OUT SIDE USE? OR DOES IT BREAK DOWN?

A:  Plastic of some sort