Questions and Answers for Milwaukee 1-3/8 in. SHOCKWAVE IMPACT DUTY Hole Saw

A:  Hello RonnyWil, the Milwaukee 1-1/8 in. SHOCKWAVE IMPACT DUTY Hole Saw has a drilling depth of 1.8in.

A:  About 3/8". I was using it to go through sheet metal.

A:  No oil is required.

A:  Can be used with or without depending on surface hardness..

A:  yes, we do offer replacement center bits and hole saws.

A:  yes, pvc may gum up blade depending how fast the tool is ran

A:  Yes I can do it.

A:  1 inche

A:  3.5 cm.

A:  Hi ROGER, this 3/4 in. Shockwave Thin Wall Hole Saw is an online exclusive item as there is no listed store SKU. It can be shipped to you directly or if it is eligible, shipped to a Home Depot store: however, it is not available to purchase directly from a Home Depot store. However, it is currently in stock to be ordered. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

A:  Thank you for your recent inquiry with The Home Depot, Trambis. For further assistance, please contact your local Home Depot store or an online representative at 800-430-3376. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  if you own a die grinder , mark 3/16" outside the hole. put a rotary burr in your die grinder and enlarge the hole as needed.

A:  Hi Bobg13! Thank you for your recent inquiry with The Home Depot. We do not carry this item in the 1/2". Please use the link below to review available size options. For further assistance, please contact your local store or call our Customer Support team at 800-430-3376. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot. http://www.homedepot.com/s/Shockwave%2520Thin%2520Wall%2520Hole%2520Saw?NCNI-5

A:  No. I would not recommend it for stainless steel.

A:  Easily, any lubrcation would help too

A:  Ok

A:  no way, none of the brands home depot has will touch stainless steel

A:  Yes, I used it on my 20 gauge sink to make a hole for drinking water faucet. I used 3-in-1 multi-purpose oil with it so it would not over heat. Worked well for me.

A:  I don't know,I'd call Milwaukee and check with them.

A:  Yes. I answered my own question with a trip to the Home Depot. Packaging clearly shows the answer.

A:  YES! This took me all of 5 mins to do. I did stop a few times and sprayed some wd-40 as a precaution. I turned the torque all the way up on my drill and used moderate pressure but not full pressure and went at a slow speed. You can do this. I couldn’t find anyone to drill a hold for an air gap and had to attempt myself after completing I have no clue why someone wouldn’t do this when I was going to pay.

A:  no , framing

A:  The package actually has a picture of a stainless kitchen sink on it in the set of materials it's designed to cut through, so I would think so. I guess they really want us to know that it'll drill through everything AND the kitchen sink.

A:  Yes, this can be used with a regular drill.