Q:Can the lens be removed so you can just use the trim?
by|Nov 30, 2023
1 Answer
Answer This Question
A: Hello. No, the lens cannot be detached from the trim.
by|Dec 6, 2023
Q:Is there a light bulb wattage limit for these?
by|Oct 10, 2023
1 Answer
Answer This Question
A: No more than 60W.
by|Oct 11, 2023
Q:Does this have the glass with it or is it just the ring?
by|Apr 15, 2023
1 Answer
Answer This Question
A: Hello Tangie. This includes the glass faceplate.
by|Apr 18, 2023
Q:Are there slots or holes the springs go into?
by|Feb 14, 2023
1 Answer
Answer This Question
A: Hello Bill. The springs should fit into mounting clips on each side of the inside of your housing.
by|Feb 16, 2023
Q:The piece I?m replacing is model c712 wh. Is this the same one?
by|Aug 29, 2022
1 Answer
Answer This Question
A: Hello. I can't seem locate anything under that model number, but if it is a 6-inch shower trim, then this will work well as a replacement.
by|Aug 29, 2022
Q:Does this trim replace Juno 20 WH? I am concerned about the product height 2.25"
by|Jun 7, 2022
1 Answer
Answer This Question
A: These products have similar dimensions and should be interchangeable even though they have different manufacturers. The 2.25 in. height is where the mounting clips connect to the light and does not go around the whole diameter.
by|Jun 23, 2023
Q:The piece I am replacing says on it. NA 17575
Is this the same. Is NA17505 the same cover
by|Feb 16, 2020
2 Answers
Answer This Question
A: The 17575 is the plastic version of the 17505 (steel). They look identical though.
by|Oct 1, 2023
1 found this answer helpful
A: The 17505 is steel and the 17575 is plastic. I'd go with the steel one. The plastic one dries out where the tension springs attaches to the plastic and often snaps off over time.
by|Apr 7, 2024
1 found this answer helpful
Q:How do you change the light bulb? The lens doesn't seem to unscrew!
by|Sep 2, 2019
2 Answers
Answer This Question
A: As this fixture is wet location rated, it can not be unscrewed. The trim will have to be removed entirely in order to replace the bulb.
by|Oct 2, 2021
1 found this answer helpful
A: The lens in held in place by two springs, you have to grab the trim,”the outer rim of it” and pull it down hopefully you have a metal one verse plastic cause my old one was plastic and over 15 year old and broke when I did. While it’s down you can squeeze the spring together to remove it. I bought this one which should last longer.