Questions and Answers for Pfister Ladera Single-Handle 3-Spray Tub and Shower Faucet 1.8 GPM in Matte Black (Valve Included)

A:  Yes, you can! There two options, the handheld shower is #LG16-200Y without slide bar or with slide bar is #LG16-300Y. You will also need a diverter valve to switch from handheld, showerhead, or both (if desired) and that diverter valve is #015-4WDX. The diverter handle trim required is #016-MG0Y in Tuscan Bronze. The handheld shower, diverter, and handle trims are all separate purchases. We have included links below to these items on homedepot.com for you to view. Handheld Shower without Slide Bar #LG16-200Y: https://www.homedepot.com/p/Pfister-3-Spray-Patterns-3-19-in-Wall-Mount-Handheld-Shower-Head-in-Tuscan-Bronze-LG16-200Y/314452298 OR- Handheld Shower with Slide Bar #LG16-300Y: https://www.homedepot.com/p/Pfister-3-Spray-Hand-Shower-with-Wall-Bar-in-Tuscan-Bronze-LG16-300Y/314452294 Diverter Valve #015-4WDX: https://www.homedepot.com/p/Pfister-2-Port-3-Way-Diverter-Valve-015-4WDX/314455921 Diverter Handle Trim #016-MG0Y: https://www.homedepot.com/p/Pfister-Northcott-1-Handle-Diverter-Valve-Trim-Kit-in-Tuscan-Bronze-Valve-not-Included-016-MG0Y/314453965

A:  No, the Ladera # 8P8-WS2-LRSGS is only available as a tub and shower. However, this model can be used as a shower only installation. It will include rough-in valve #0X8-310A, and the valve will come with a plug or cap to use on the tub port for a shower only installation.

A:  Pfister Ladera Single-Handle 3-Spray Tub and Shower can be installed as shower only. Please view the rough-in valve installation instructions provided below. https://pfisterstorage.blob.core.windows.net/documents/44353-0500%20web.pdf

A:  The combo setting for this showerhead is in the middle at a 6 o'clock position. If the setting is not functioning, please give our Support Team a call at 1-800-732-8238, and we’ll be happy to help troubleshoot or send you a replacement if needed.

A:  When installing the valve, the black plaster guard should be installed flush with the finished wall. You can then remove it after or leave it on if you are using it to support a thin wall application.

A:  Yes. Pfister Ladera model #8P8-WS2-LRSY includes the #0X8-310A valve. This valve has 3 options for supply connections, Copper, PEX, and Iron Pipe. PEX lines can be used except for the lines from the valve to the tub spout connections. Below is a link to valve instructions; please refer to pages 4 and 5 for supply connection options. https://pfisterstorage.blob.core.windows.net/documents/44353-0500%20web.pdf

A:  Yes, you can move it side to side and up and down. That is one reason I liked this shower head.

A:  Yes. The Ladera showerhead on model # 8P8-WS2-LRSB swivels on a ball joint to position the showerhead where needed.

A:  Yes! The Ladera model #8P8-WS2-LRSY includes the quick-connect adapter for the tub spout in the box.

A:  Almost but not a full 180 degrees. The handle should rotate approximately to a 2 o’clock position for full hot. It sounds like the cartridge's temperature adjustment ring may need to be repositioned. Below is a link to the installation guide for the valve #0X8-310A. This has the temperature adjustment ring instructions. Please refer to page 9, step 11. If you need further assistance with your model, please contact our Support Team by calling us at 1-800-732-8238 to further assist with your product. 0X8-310A Valve Installation Guide: https://pfisterstorage.blob.core.windows.net/documents/44353-0400%20web.pdf

A:  The handle is not available by itself and you would need to purchase a new #8P8-WS2-LRSY to get the handle or try and piece it together, the handle and flange. If the valve you are try to update with this handle is not a Pfister valve, this handle trim will not work. If it is a Pfister valve, and depending on the age the valve may need to be retrofitted. It may be best if you give us a call at 1-800-732-8238 so we can provide further guidance.