Questions and Answers for Pylex 2-Steps Steel Stair Stringer Black 7-1/2 in. x 10-1/4 in. (Includes 1 Stair Stringer)

A:  Hello SIr, The load weight of each stringer is 100 pound per square foot. Anything else, please let us know. Thanks

A:  Hello, You will need 1 x 4 steps (13904) + 1 x 5 steps (13905) and one steel stringer connector (13920) to get to 9 steps stringer. We do have 36’’ (13941), 42’’ (13942), 48’’ (13943), 60’’ (13944), 72’’ (13945) steel steps available at Home Depot website to. Thanks

A:  Hello SIr, For a staircase of 8 steps and more you need a connector and the post is mandatory. Anything else, please let us know. Thanks

A:  Hello, This included only 1 stringer, you will need two for your staircase. The reason why it is sold by the stringer is some application needs 3 or even 5 stringers. Anything else, please let us know. Thanks

A:  Hello Sir, No problem to attach our stringer to cinder block using appropriate concrete screws ( such as Tapcon screws ) Anything else, please let us know. Thanks

A:  Hello Sir, Unfortunately no. Anything else, please let us know. Thanks

A:  Hello, For a 87" vertical rise you need 2 risers of 11 steps composed of a 5 and a 6 steps connected together using our steel stringer connector. Total run will be 112-¾". Anything else, please let us know. Thanks

A:  Hello Sir, These can be used indoor abnd outdoor without any problem. Please refer to your local building code for requirements. Anything else, please let us know. Thanks

A:  Hello Sir, As per our engineering document, our riser step heights and depths meet the requirements of 2021 IBC Section 1011.5.2 Exception 3 and are acceptable for use in Group R‐3 occupancies; within dwelling units in Group R‐2 occupancies; and in Group U occupancies that are accessory to a Group R‐3 occupancy or accessory to individual dwelling units in Group R‐2 occupancies. Anything else, please let us know. Thanks

A:  Hello Sir, The best solution is to install the top at 9" from your deck top and then use concrete slab at the bottom to raise the ground by 2". Anything else, please let us know. Thanks