Q:with flush mount, what it the distance from the ceiling- is it 18" from ceiling to lowest part of...
by|Sep 14, 2019
2 Answers
Answer This Question
A: This is correct, it is 18" from ceiling to the lowest part of the shade when hung flush mount. Using the 4" down rod, would put it at roughly 22", typically just shy of that with the fitting.
by|Sep 16, 2019
A: yes that would be correct
by|May 7, 2020
Q:Is the clear an oil rubbed bronze with black blades? What color is the silver? It is hard to tell...
by|Sep 12, 2019
2 Answers
Answer This Question
A: The fan motor housing is black. The blades are black with gold veining on one side and the other side is dark cherry. It is very beautiful.
by|Mar 31, 2020
A: The clear fan has an oil rubbed bronze finish with reversible antique black and mahogany blades. The silver has silver metal finishing on the shades, while also having an oil rubbed bronze finish on the metal housing and canopy. The blades are also the reversible antique black and mahogany. Hope this helps clear things up for you.
by|Sep 12, 2019
Q:Bulbs to use
by|Aug 6, 2019
2 Answers
Answer This Question
A: These bulbs are sold at many hardware stores, as well as different online retailers. Please search for E12, type B, 40W candelabra bulbs and E12, type C, 7W candelabra bulbs.
by|Aug 8, 2019
A: This requires 2 E12, type B 40-Watt bulbs and 4 E12, type C 7-Watt bulbs.
by|Aug 8, 2019
Q:With the clear fan, it appears that a sort of fishing line is wrapped around holding the crystals...
by|Aug 1, 2019
2 Answers
Answer This Question
A: It is a very small gauge of metal wire
by|Aug 2, 2019
A: Yes these are very fine wires but they take nothing away from the beauty of the fan
by|Aug 20, 2019
Q:Is it quiet or noisy?
by|Jul 29, 2019
4 Answers
Answer This Question
A: quiet
by|Jul 30, 2019
A: There is the typical "break-in" time for a ceiling fan where there can be some noise, but the fan is overall quiet.
by|Jul 30, 2019
A: It is so noisy that the people in the bedroom above would be disturbed.
I could not sleep with this fan running. It’s going back.
by|Mar 19, 2020
A: The item is a little noisy
by|Jul 30, 2019
Q:since you have to install the top bulbs before installation, are you able to change them if they ...
by|Jul 27, 2019
2 Answers
Answer This Question
A: Yes. There are little vents above each of the small bulbs that are accessible by removing 2 small screws.
by|Mar 31, 2020
A: Yes, you will need to use a stubby screwdriver to remove the access plates. They can be somewhat difficult to get to if you flush-mount the fan, so we suggest using LED bulbs as they have a much longer lifespan than traditional bulbs.
by|Jul 29, 2019
Q:Will there be any issues hanging this to a 72inch downrod? I have a 20' ceiling. Do you anticipat...
by|Jun 28, 2019
2 Answers
Answer This Question
A: We have only tested up to a 48" down rod. We cannot speak to anything longer in certainties, however, there shouldn't be an issue with a longer down rod, as long as it is stable enough to hold the weight of the fan. You will want to make sure you have a 1/2" standard down rod with pin attachment.
by|Jul 1, 2019
A: No wobble with ceiling mount. Did not down rod it.
by|Jul 30, 2019
Q:How is the air flow coming off of the fan?
by|Jun 24, 2019
3 Answers
Answer This Question
A: Very efficient
by|Apr 2, 2020
A: It is a lot of air flow!
by|Jul 30, 2019
A: When on high, the airflow is 6169 cubic feet per minute