Questions and Answers for SereneLife 10,000 BTU Portable Air Conditioner Cools 300 Sq. Ft. with Dehumidifier, Fan Modes and Window Mounting Kit in White

A:  No. The process generates heat and it has to go somewhere. A window unit obviously vents directly outside but a portable unit needs a hose to vent outside

A:  It's necessary to install the window hose for the hot temperature.

A:  If the internal vessel is full of water, the display screen will display “FL”, and the compressor stops working automatically. After power, unscrew the water cover, pull out the water plug to drain water, and it will become normal after being restarted.

A:  CLEAN AND MAINTENANCE: Drainage With self-evaporating system, the appliance could perform better and save energy in a way of cooling down condensor by reusing condense water. The appliance would display “FL” with buzz sound, if built-in water container is full. After compressor stops, please drain water as follows: 1. Unplug and dismantle air exhaust duct; 2. Move the appliance to a right place; 3. Pull out the water plug, and drain all water; 4. Re-insert the water plug; 5. Re-install the air exhaust duct, restart the appliance.

A:  Product Dimension (L x W x H): 27.6'' x 12.8'' x 11.6'' -inches, the hose is about 3 feet

A:  Please check out this model SLACHT108

A:  Yes. An exhaust hose should be included in every purchase.

A:  Yes. It has a Window Installation Plate with filler panels to close the gap in an open window and direct hot air outside.

A:  You just need to make you to install the hose and window sealer. The unit needs to vent when you are using the AC.