Q:what type of wire is used for oven outletto brackerbox
by|Jan 18, 2018
3 Answers
Answer This Question
A: 8/2wg 50a
by|Mar 9, 2021
A: Need to refer to your oven manufacturer installation instructions. Most cases it will be 10/3 but some larger or commercial type ovens could use 8/3.
by|Mar 9, 2021
A: Your question cannot be answered without knowing the voltage and amperage of the required circuit. Refer to the oven installation instructions.
by|Mar 9, 2021
Q:Can I run this wire outside and under ground if it is through pvc pipe
by|Sep 28, 2017
3 Answers
Answer This Question
A: NO! It’s not rated for this use.
Use THHN
by|Jun 14, 2021
1 found this answer helpful
A: No! NM-B cable can only be used in indoor dry locations and cannot be used outside at all. Outdoor locations, including in conduit, are classed by the NEC as wet locations.
by|Mar 9, 2021
A: Please consult a local electrican! The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|Mar 9, 2021
Q:I realize this wire is for dry locations but is it safe if its mounted in a crawl space underneith the house that has vents?
by|Jun 16, 2017
3 Answers
Answer This Question
A: It is not safe and against codes.
by|Apr 15, 2021
A: This would be a judgement call by the AHJ. Generally anywhere inside the envelope of a house is considered a dry location.
by|Apr 15, 2021
1 found this answer helpful
A: Unfortunately no, NM wire is rated for indoor use only. You may consider using UF type wire; which is rated for outdoor use. However you will need to check the local codes for your area.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|Oct 27, 2023
Q:I have a crawl space under my house, can I mount this wire underneath to the floor joist?
by|Apr 30, 2017
2 Answers
Answer This Question
A: You will need to check with the local building inspectors in your areas to determine which items meet code in your area. Codes do vary from municipality to municipality, and can change over a short period of time.
by|Mar 9, 2021
1 found this answer helpful
A: No
by|Mar 9, 2021
Q:Can i use this wire outside in conduit? Looking for wire to run from 100 amp service to a cabin.
by|Apr 24, 2017
3 Answers
Answer This Question
A: Absolutely not! NM-B cable is only approved to be used in indoor dry locations. Outdoor locations, even in conduit, are classed by the NEC as wet locations.
by|Mar 9, 2021
A: No. This isn’t rated for 100amps and not rated for under ground use
by|Feb 4, 2021
A: No, this product is not rated for outdoor use.
We carrier several wire products that are rated for outdoor use; however I would suggest you check with your local electrician for a list of approved wire products that is rated for outdoor use in your area.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|May 4, 2023
Q:Can this be buried in sealed conduit?
by|Feb 8, 2017
2 Answers
Answer This Question
A: No, NM-B cable can only be used in indoor dry locations, all outdoor locations, even in conduit, are classed by the NEC as wet locations.
by|Mar 9, 2021
A: No. NM is not rated for any kind of burial. NM is to only be used inside. The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|May 4, 2023
Q:Can this be buried in sealed conduit?
by|Feb 8, 2017
1 Answer
Answer This Question
A: No. NM is not rated for any kind of burial. NM is to only be used inside.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|Apr 27, 2021
Q:What is the diameter of this cable? Need to put into conduit to run down the outside of an interior wall. Without conduit the cable would be exposed. This will be in a shop/garage.
by|Jan 7, 2017
2 Answers
Answer This Question
A: This is a flat cable with no diameter. It cannot be used outside, not even in conduit.
by|Mar 9, 2021
A: This product has a depth of 13.5 inches and a height of 3 inches.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|Jan 8, 2021
Q:I purchased a 6000w. 240v. shop heater is this 8-2 wire enough to power this heater safely?
by|Dec 15, 2016
2 Answers
Answer This Question
A: 6000watts / 240vac = 25amps. So yes, the 8ga. wire would have way more than enough capacity. 10 gauge would be a better choice for purchase as it is good for 30amps.. Hope this helped.
by|May 4, 2023
1 found this answer helpful
A: Check the current requirement of the heater. If it is 25 Amps (expected current for a 6000W/240V heater), then an 8 AWG conductor will be large enough to supply that current. However you will need the 8-3 NM-B Cable to supply 240V rather than 120V (2 hots, neutral, and EGC). The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.