Questions and Answers for Square D 200 Amp Ringless-Horn Bypass Overhead or Underground Meter Socket with Tri-Plex Grounding

A:  not # 4 but 4/0 (4 ought) there is a difference. That's for your in and out ground. The box it'self doesn't get grounded with a ground wire going to the ground rod.

A:  Hello, The UHTRS213B will accept (1) #8 - 350kcmil Al/Cu wire for the Main Line, Load and Neutral and (1) #14 - #2 AWG Al/Cu wire for the Ground. Regards, Customer Care Center

A:  For a 200 amp service you need a #6 copper, solid or stranded, to at least one ground rod. If the resistance to ground exceeds 25 ohms you must install the second ground rod. You also need a #4 copper or #2 aluminum, solid or stranded, to the metallic water service within 5 feet of where it enters the home. You must jumper around any water meters or pressure reducing valves with the continuous Grounding Electrode Conductor.

A:  UTHRS212B meter socket measures approximately 11'' by 14'' by 4.8''. Regards, Schneider Electric Customer Care

A:  High quality steel.

A:  The enclosure is painted steel.

A:  This is aluminum.

A:  Gray-painted steel.

A:  I used an adjustable end wrench. It's Allen on the inside and hex or oct on the outside. You can use an open end wrench.

A:  UHTRS212B lugs utilize both a 1/2'' external Hex nut and a 5/16'' internal allen hex.